24A - Tile adhesive - Soudal

24A - Tile adhesive - Soudal

24A tile adhesive , pasty and elastic, ready to use, intended for wall tiles and tiled floors indoors .
Suitable for applications on porous surfaces such as stone , concrete , cement surfaces, plaster , wood .

Features :

• Ready-to-use pasty glue
• High (initial) adhesive strength and water resistance
• Open time: approx. 15 mins.
• Tile size 20x20 cm maximum.

Applications:

• For gluing all types of tiles on walls and floors.
• Tile-to-tile bonding is also possible.
• Particularly suitable for tiling kitchens and damp areas.
• Since this product is water-based, it is important that one of the supports be porous.
  Examples: brick, stone, concrete, plaster, wood, etc.
• Consumption: 1000 to 1500g/m².

Manual :

1. Apply the adhesive to the substrate, at a 60° angle, using a spatula (3 to 8 mm, depending on the size of the tiles).
2. Do not apply more adhesive to the substrate than can be applied within approximately 20 minutes.
3. Lay the tiles in the adhesive layer in a sliding motion and press well.

Conditioning :

• 290 ml, 1 kg and 5 kg and 17 kg.