73A MS Parquet Adhesive - Hybrid polymer adhesive for wood floors - Soudal

73A MS Parquet Adhesive - Hybrid polymer adhesive for wood floors - Soudal

MS-Polymer parquet adhesive based on SMX hybrid polymer, elastic. Suitable for laying large format solid parquet and under parquet. Consumption: 1000 to 1200g/m².

Features :

• Elastic Label EC-1R PLUS: very low emission.
• Ready to use, monocomponent.
• Solvent free.
• Does not contain water.
• Isocyanate free Easy to apply.
• High final adhesion strength (according to EN14293).
• Suitable for underfloor heating Does not stain hands.

Applications:

• Suitable for use on porous and non-porous substrates such as mosaic, anhydrite, concrete, screeds, wood, chipboard and OSB (large chipboard), compatible with heating and floor cooling.
• Consumption: 1000 to 1200g/m².

Manual :

1. Allow the glue to acclimate before use.
2. Apply the glue to the support using a serrated spatula Soudal Parquet Spatula N°11.
3. Limit the treated area to what can be covered with parquet within 30 minutes.
4. Lay the parquet by slipping it into the glue and tap it with a mallet or a rubber hammer.
5. Ensure that good contact is made between the glue and the blades (min. 80% coverage).
6. Possibly weigh down the parquet during the polymerization.
7. Proceed with sanding as soon as possible after a minimum of 24 hours.
8. For the removal of fresh glue stains, use Soudal Glue Cleaner or Soudal Swipex.

Conditioning :

• Bucket of 7 and 15 kg.