Fila Wet - Consolidating wet look protector - Fila

Fila Wet - Consolidating wet look protector - Fila

• Gives a pleasant wet effect to surfaces with raw finish (aged, sandblasted, flamed, etc.).
• Protects the material from water and oil.
• Treatment with a consolidating effect.

Benefits: 

• Gives a more or less intense wet effect depending on the number of layers applied.
• Does not turn yellow regardless of environmental and aging conditions.
• Does not flake.

Application:

1.  When the surface is dry and clean, apply a layer of WET in a consistent and continuous manner.
2. After an interval of 24 hours, repeat the operation in the same way.
3. For highly absorbent materials, a third layer may be required to achieve the desired wet effect.
4. Maintenance:diluted solutions of CLEANER PRO. In places most exposed to atmospheric agents, it is recommended to renew the application of the product every two years.

Yield: 

• 10 to 20 m²/L.

Careful: Do not apply the product outdoors in case of expected precipitation within 24 hours. Do not walk on the floor during drying: wait 24 hours after the last layer. Do not apply to terracotta floors or shiny surfaces. In case of an error during application or for a necessary deep cleaning, eliminate WET using NOPAINT STAR. The product cannot be applied to substrates with problems related to rising humidity and in damp places where water stagnates (showers, saunas, Turkish bath, etc.).