ZVC Motorklean - Evaporating Engine Degreaser - Zep Industries

ZVC Motorklean - Evaporating Engine Degreaser - Zep Industries

Fast-evaporating degreaser for mechanical parts. Ideal for cleaning the exterior of the engine and all mechanical parts . Dissolves and removes grease, (lubricating) oil , and tar from surfaces.

Properties :

• Suitable for all types of engines and mechanical parts and components such as filters, gearboxes, injection pumps, clutches, engine blocks, suspensions, etc...
• Very powerful formula for dissolving oil, grease, lubricating oil, light and heavy fuel oils.
• Requires no dilution or preparation.
• Vulnerable surfaces such as aluminium, tin and zinc are not affected due to the absence of aggressive substances.
• Free from AOX compounds, phosphates and complex compounds.
• Silicone-free.

Applications:

For cleaning engine blocks of cars, trucks, boats, motorcycles, tractors, machine parts, de-energized electric motors, etc. For use in garages, the transport sector, car wash companies, workshops, service stations, parking lots, etc.

Instructions for use:

1. Spray the cleaner evenly onto the surface to be treated.
2. Leave on for 10 to 15 minutes.
3. Accelerate degreasing using a brush or soft cleaning brush until all dirt is removed.
4. Rinse thoroughly using a microfiber cloth dampened with water, a jet of steam or pressurized water.
5. Dry thoroughly before use.
6. For faster drying, dry the parts with compressed air.
7. The product can also be applied with a brush or a cloth.

Packaging:

1 Liter.

FAQ - Frequently Asked Questions

1. Does it require rinsing?
   No, its evaporative formula allows for quick drying without rinsing. Wiping may be helpful on heavily soiled areas.
2. Can it be used on a hot engine?
   No, the engine must be switched off and completely cooled before application.
3. Is the product safe for use on seals, rubber, or plastics?
   It is designed for metal surfaces. Plastics and rubbers may be sensitive. Test on a small area before use.
4. Is it suitable for cleaning motorcycle chains?
   Yes, it effectively dissolves oil and grease. However, check the chain lubrication afterwards after cleaning.
5. Can it be used indoors?
   Yes, but only in a well-ventilated area and away from sources of ignition, as the product is flammable.
6. Does it leave a film or residue?
   No, it evaporates without leaving a greasy film, leaving a clean and dry finish.
7. Is it compatible with aluminum and stainless steel?
   Yes, it is suitable for most metals used in mechanics. Always avoid sensitive or decorative surfaces.
8. Can it be used in a cleaning machine or an ultrasonic bath?
   No, the product is designed for direct application, not for immersion.