ZVC AD Cleaner - Mechanical Parts Degreaser - Zep Industries

ZVC AD Cleaner - Mechanical Parts Degreaser - Zep Industries

Fast medium evaporation degreaser for mechanical parts.
Ideal for removing tar, grease, glue and carbonaceous substances from mechanical parts.

Properties :

• Suitable for all types of engines and mechanical parts and components such as filters, gearboxes, injection pumps, clutches, engine blocks, suspensions, etc...
• Very powerful formula for dissolving oil, grease, lubricating oil, light and heavy fuel oils.
• Vulnerable surfaces such as aluminium, tin and zinc are not affected due to the absence of aggressive substances.
• Flash point above 63°C.
• Environmentally friendly, as it contains no AOX compounds, phosphates and complex compounds.
• Silicone-free.

Applications:

For cleaning engine blocks of cars, trucks, boats, motorcycles, tractors, machine parts, de-energized electric motors, etc...
For use in garages, the transport sector, car wash companies, workshops, service stations, car parks, etc...

Instructions for use:

1. Apply undiluted using a spray gun, brush, or by immersion.
2. Leave on for 10 to 15 minutes.
3. Speed up degreasing using a brush or soft cleaning brush until all dirt is gone.
4. Rinse thoroughly using a microfiber cloth dampened with water, a jet of steam or pressurized water.
5. Dry thoroughly before use.
6. For faster drying, dry the parts with compressed air.
7. The product can also be applied with a brush or cloth and is suitable for use with unheated ultrasonic baths.

Packaging:

1 Liter / 5 Liters.

FAQ - Frequently Asked Questions

1. Can ZVC AD Cleaner be used on all metals?
   Yes, it is compatible with most metals used in mechanics. However, as with any solvent-based degreaser, a preliminary test is recommended on sensitive or treated metals.
2. Can it be used on painted surfaces?
   The product may damage certain coatings or paints. Test on an inconspicuous area before use.
3. Is it suitable for cleaning engines?
   Yes, it is particularly effective at dissolving grease, oils and residues on engine blocks, cylinder heads, gearboxes and mechanical components.
4. Do I need to rinse after application?
   Rinsing is not mandatory, but becomes advisable in case of significant soiling or if residues persist after wiping.
5. Can it be used in a degreasing fountain?
   Yes, its formulation is compatible with manual or circulating fountain systems.
6. Does it leave a greasy film after drying?
   No, it evaporates without leaving any greasy residue, allowing for immediate reassembly of parts or direct application of lubricant.
7. What is the duration of action?
   The product acts very quickly, from a few seconds to a few minutes depending on the level of soiling.
8. Is it dangerous for rubber seals?
   Like any strong solvent, it can affect certain seals or sensitive plastics. Avoid prolonged contact.
9. Can it be used in the food industry?
   No, this product is not approved for use in the agri-food sector.