Unicolor doormat GRAFICSTAR

GRAPHICSTAR is the superior quality indoor doormat to beautify your entrances , entry halls, reception areas ,... Choose the color you want from the 29 available colors.

  • Superior color fastness and wash resistance .
  • Crush resistant.
  • Fade-resistant.
  • High-twist tufted nylon .

Please provide the external dimensions of the doormat OR the frame. We will calculate the rest.

If you would like to personalize this doormat with your logo, click HERE !

991 Items
€39.29Tax Included

Volume discounts

QuantityYou SaveUnit price
25 %€0.00
1010 %€0.00
2020 %€0.00
PAI GRFUSM
9145386000259

Unicolor doormat GRAFICSTAR

GRAPHICSTAR is the superior quality indoor doormat to beautify your entrances , entry halls, reception areas ,... Choose the color you want from the 29 available colors.

  • Premium tufted logo rugs offer superior color fastness and wash resistance .
  • The high-twist nylon yarn resists crushing and traps dirt and moisture .
  • Fade resistant - Solution dyed nylon is bleach resistant and UV resistant .
  • High-twist tufted nylon .

Please provide the external dimensions of the doormat OR the frame. We will calculate the rest.

PAY ATTENTION to the direction of travel.

PRESENTATION

The GRAFICSTAR doormat is made of high-twist nylon that is dyed throughout.

It is recommended for indoor use at entrances , in lobbies , at reception desks and any passageway you wish to enhance .

It is fully washable and offers a palette of 29 colors for creating your design.

Specifications :

  • FIL: Continuous solution-dyed type 6 nylon filament.
  • THREAD WEIGHT: 1000 g/m².
  • BATTERY THICKNESS: 11.3 mm.
  • TOTAL WEIGHT: 3.20 kg/m².
  • PRIMARY SUPPORT: 120 g/m² spun polyester non-woven fabric.
  • RUBBER SUPPORT: 100% EXS Nitrile rubber. Compression molded with reinforced edges for excellent dimensional stability and flat laying properties.

KEY POINTS: We offer a wide choice of colors for your projects, ramps, doormat frames, as well as integrated scrapers or brushes, a harder surface, custom stainless steel marking, a design choice for outdoor use,... Available upon request or see our other pages.

EDGE THICKNESS AND FINISH:

  • ± 8 mm with a 1.5 cm rubber edge (doormat to be placed on the floor)
  • ± 10 mm without edge (recessed doormat)

The ± 10 mm doormat without an edge can be placed in a pit and surrounded by a doormat frame.

The 1.5 cm wide rubber edge has a thickness of 3 mm.

DOORMAT UNDERLAYER:

The doormat is available in 2 different underlayers.

  1. Smooth sole: A smooth rubber sole.
  2. Claw sole: A sole raised by "studs" ideal for dirty places, slopes or any other place where grip is not optimal.

AVAILABLE COLORS

CODE COLOR
6021 Black
9489 Anthracite
6012 Gray
327 Medium Grey
306 Light gray
295 Beige
415 Orange
651 Gold
292 YELLOW
409 Pale red
6134 Brick red
421 Red
405 Fuchsia
514 Navy blue
052 Light blue
526 Dark blue
523 Blue
524 Turquoise
6025 Mole
619 Grass green
406 Bordeaux
021 Brown
245 Ocher
6115 Light brown
102 White
624 Dark green
605 Forest green
636 Green
623 Apple green

CHOICE OF DOORMAT FRAME

When ordering a custom-made frame, you must specify the frame's external dimensions . Our technical department will then calculate the usable dimensions of the doormat.

To compensate for the thickness of the doormat frame, it may be necessary to level the bottom of the doormat (using a leveling compound such as Egaline) or add a rubber underlay of a few millimeters; see "RUB - Rubber underlay for entrance doormats" on this page.

PROMA-JAN - Aluminum - Natural - Height 16 mm

PROMA-JAM doormat frame, reduced height 16 mm

Frames for entrance mats in anodized aluminum color, natural color .

Profiles of 30 x 16 x 3 mm, with a visible top edge of 7 mm.

Profile height: 16 mm - Doormat recess height: 12 mm.

VER-ALU - Aluminum - Natural - Height 16 mm or 21 mm

VER-ALU - Aluminum - Natural - Height 16 mm or 21 mm

Frames for entrance mats in aluminium colour, natural colour.

Profiles of 21 x 16 mm, 3 mm thick. Visible edge of 6 mm.

Profile height: 16 or 21 - Doormat recess height: 10 or 15.

PROMA-AN - Aluminum - Natural - Height 26 mm

detail custom doormat frame proma in natural aluminum

Frames for entrance mats in anodized aluminum color, natural color.

Profiles of 30 x 26 mm, 3 mm thick. Visible edge of 7 mm.

Profile height: 26 mm - Doormat recess height: 22 mm.

PROMA-AR - Aluminum - Stainless steel color - Height 26 mm

Rosco custom-made aluminum doormat frame detail in stainless steel color

Frames for entrance doormats made of aluminum in stainless steel color.

Profiles of 30/26/3 mm, with a visible upper edge of 7 mm and fixings.

Profile height: 26 mm - Doormat recess height: 22 mm.

VER-ALU - Aluminum - Natural - Height 26 mm or 31 mm

VER-ALU - Aluminum - Natural - Height 26 mm or 31 mm

Frames for entrance mats in aluminium colour, natural colour.

Profiles of 31 x 26 mm, 3 mm thick. Visible edge of 6 mm.

Profile height: 26 or 31 mm - Doormat recess height: 20 or 25 mm.

PROMA-AZ - Aluminum - Anthracite Grey - Height 26 mm

Frame for Doormat, Aluminum, Anthracite Grey

Frames for entrance doormats in aluminum, in anthracite grey.

Profiles of 30/26/3 mm, with a visible upper edge of 7 mm and fixings.

Profile height: 26 mm - Doormat recess height: 22 mm.

VER-BLACK - Black lacquered aluminum - Height 26 or 31 mm

Custom black 26mm aluminum doormat frame detail by Verimpex

Frames for entrance doormats in black lacquered aluminum.

Profiles of 31/26 or 26/31 mm, with a visible upper edge of 6 mm.

Profile height: 26 mm or 31 mm - Doormat recess height: 20 mm or 25 mm.

Please note, the frame thickness is 6 mm, you may need to use an underlay to compensate for the thickness.

PROMA-MS - Brass - Natural - Height 26 mm

Detail of custom-made doormat frame by Proma MS Rosco, brass

Natural brass entrance mat frames.

Profiles of 30/26/3 mm, with a visible upper edge of 7 mm.

Profile height: 26 mm - Doormat recess height: 22 mm.

VER-LAI - Brass - Height 26 or 31 mm

Brass doormat frame, 26 mm high

Aluminum entry doormat frames in brass color.

Profiles of 31/26 or 26/31 mm, with a visible upper edge of 6 mm.

Profile height: 26 mm or 31 mm - Doormat recess height: 20 mm or 25 mm.

Please note, the frame thickness is 6 mm, you may need to use an underlay to compensate for the thickness.

TEXTILE

  • FIL: Continuous solution-dyed type 6 nylon filament.
  • THREAD WEIGHT: 1000 gr/m² .
  • FIBER LENGTH: 11.3 mm.
  • TOTAL WEIGHT: 3.20 kg/m².
  • PRIMARY SUPPORT: 120 g/m² spun polyester non-woven fabric.
  • RUBBER SUPPORT: 100% EXS Nitrile rubber. Compression molded with reinforced edges for excellent dimensional stability and flat laying properties.
  • BORDER THICKNESS: 3 mm
  • WIDTH OF THE PERIFEROUS BAND: 1.5 cm
  • TOLERANCE: +/- 2%

HD digital printing is done on white fibers; specialized and durable dyes are sprayed directly onto the fibers (like current color printers).

During the drying process, the color fuses with the fibers for maximum durability.

The mat or doormat is then vulcanized onto the rubber to permanently fix the fibers.

SUPPORT & BACK

Smooth or Claw 3mm rubber sole.

The printed mat can also be glued to the underlay or fixed using Velcro or double-sided adhesive,... However, this reduces the choices for care and maintenance.

ECOLOGICAL FOOTPRINT

The manufacturer is committed to reducing the environmental footprint of its product production.

For this reason, the products are manufactured using 100% reusable energy and local materials.

CLEANING INSTRUCTIONS

GRAFICSTAR carpets can be cleaned in different ways.

  1. They can be commercially bleached (see bleaching instructions).
  2. Vacuumed regularly (daily in high-traffic areas; weekly in low-traffic applications).
  3. Clean with an extractor or hose down as needed to remove heavy dirt. Hang to dry.

Carpets must always be dry before being put back into service.

LAUNDRY WASHING INSTRUCTIONS

  • Rinse for 2-3 minutes at a medium water level with a maximum temperature of 49°C.
  • Rinse (optional), 2-3 min. on a medium water level with a maximum temperature of 49°C
  • Pause, 2-3 min. on a high water level with a maximum temperature of 49 °C
  • Rinse for 2 minutes under high water pressure with a cold temperature.
  • Rinse for 2 minutes under high water pressure with a cold temperature.
  • Extract at low speed, 1-2 min.
  • Shake with the rotating drum, 1 min.
  • Extract, on a maximum of 250G, 3-5 min.
  • Dry (optional), 5-10 min. with a maximum basket temperature of 82°C
  • Cooling, 5 min.

Additional recommendations:

  • It can be washed with other SDN rugs.
  • For heavily soiled carpets, increase the temperature up to a maximum of 71°C.
  • The breakage should not exceed a pH of 9.5; use low pH non-ionic detergents.
  • Do not over-dry carpets; the dryer basket temperature should not exceed 82°C.
  • If the carpets are not dry, the final rinse temperature can be increased to 49°C. This will reduce moisture retention after extraction.
  • Lay the rugs flat after removing them from the washing machine; allow the rugs to cool before rolling them up.

FAQ - Frequently Asked Questions

  1. Is the Unicolor GRAFICSTAR doormat suitable for outdoor use?
    It is primarily recommended for indoor use or in sheltered entrances. Prolonged exposure to the elements may reduce its lifespan.
  2. Is it non-slip?
    Yes, it has a non-slip base which ensures excellent stability on smooth floors.
  3. Can it be cleaned easily?
    Absolutely, a simple vacuuming is sufficient for routine maintenance. Depending on the level of soiling, it can also be shaken or cleaned occasionally.
  4. Is it suitable for high-traffic areas?
    Yes, the Unicolor GRAFICSTAR doormat is designed to withstand medium to high traffic, making it perfectly suited for offices and shops.
  5. Does it retain moisture well?
    Yes, its structure allows for good moisture absorption, thus limiting water stains in interior spaces.
Pierre et Sol
PAI GRFUSM
991 Items

Data sheet

Signal word
As of Q3 2023, no signal word is listed for this item when last checked. Please check the latest update of the technical data sheet issued by the manufacturer.
Hazard statements
As of Q3 2023, no hazard statements are listed for this item when last checked. Please check the latest update of the technical data sheet issued by the manufacturer.
Hazard pictogram

Specific References

EAN13
9145386000259

Customers who bought this product also bought: