Paillasson Photo & Logo PROMOSTAR

Photo & Design Doormat PROMOSTAR

PROMOSTAR is the ideal mat for advertising and visibility in your company , store , point of sale , or during an exhibition . Personalize it to your image and get noticed !

• HD sublimation photographic printing quality.
• High quality , knitted polyester surface.
• Non-slip 100% nitrile rubber sole.
• Customizable with logo , photo, slogan, message, illustration, etc.
• Printed in vibrant, photographic quality on knitted polyester.

Please indicate the external dimensions of the doormat OR the frame. We calculate the rest.

BE CAREFUL about the direction of travel.

PRESENTATION

The PROMOSTAR doormat has a durable knitted polyester surface that can be fully personalized with a dynamic, photographic quality design.

The durable 0.9mm nitrile backing provides surface protection and has exceptional lay-flat properties.

The 12mm nitrile border frames your chosen design for a classic finish.

Specifications:

• CARPET: Non-pill knit printed polyester.
• RUBBER: Nitrile rubber.
• TOTAL WEIGHT: 1.56 kg/m².
• THICKNESS: ± 2 mm.
• EDGE: 12 mm.
• ELECTROSTATIC PROPENSION: The electrostatic conductivity is below the threshold of 2KV.

To remember: We offer a wide choice of colors for your projects, ramps, doormat frames, but also integrated scrapers or brushes, a harder surface, personalized stainless steel marking, a design choice for outdoors, etc. .. On Request or to see on our other pages.

THICKNESS AND EDGE FINISH:

The PROMOSTAR doormat is a very thin doormat of ± 2 mm thick.

The edge is non-slip in 100% nitrile rubber and is 12 mm wide.

INSTRUCTION WHEN SENDING YOUR IMAGE-PHOTO-LOGO

NOTE: All projects are checked before studies and production of a “PROOF” proof.

Only YOUR VALIDATION of the “PROOF” triggers the production of your carpet, then preparation for shipment. Please note, no corrections can be made after validation and production of the BAT.

Instructions for obtaining the BAT after ordering:

1. You must take into account the dimensions ordered and the proportions of your sketch.
2. Your image should, if possible, be provided with the exact dimensions of the project (and in good definition)
3. You send us by email an image/photo of your project in JPG format (this is classic), PDF, PNG, PSD, TIFF, PNG or AI
4. You tell us the maximum 3 colors you want, clearly indicating which color for which use.
5. The image is uploaded by our computer graphics department and checked.
6. The image is resized following your ordered exterior dimensions. It is reduced, where applicable, by the thickness of the frame or the rubber edge
7. A BAT test is sent to you by email and/or to your customer account
8. You can request corrections or adaptations*
9. You validate, unequivocally, the proof by email.
10. We confirm and launch the production of your personalized and tailor-made carpet.

Attention :

• Take into account a margin of +- 3 cm on the edges of the image in order to manage tolerances
• Item color and print color may vary from the image shown on screen or on paper.
• You can send us the Pantone/RGB references of your logo to respect the marking colors. Without indication we will use standard colors. Technical deviations from Pantone/RGB colors must be tolerated.
• The BAT proof is sent in real size at 100%, unless the dimensions and/or a different percentage are indicated (for example 25%: the final result is therefore 4 times larger).
• Please check the proof carefully. After your approval from the proof, we are no longer responsible for errors in the text and/or logo and/or image.

* In order to avoid abuse, corrections to the BAT are possible within the limit of 3 studies. However, for the less experienced, participation in infographic services could be considered to obtain the desired project.

ECOLOGICAL FOOTPRINT

The manufacturer is committed to reducing the ecological footprint for the production of its products.

For this reason, the products are made from 100% reusable energy and with local materials.

CLEANING INSTRUCTION

PROMOSTAR mats can be cleaned in two ways.

• They can be rinsed in the sink.
• They can be washed in a standard washing machine below 30°C.

Mats must always be dry before being put back into service.

Attention :

• The doormat is printed using a press which tints the fiber of the doormat. The doormat then goes through an oven to fix the color in the fiber. This passage in the oven will cause the doormat to shrink by +/- 2 cm on each side. Please be careful not to transmit photos, images, drawings, logos, etc. with border elements which could disappear when the doormat shrinks or be sure to anticipate this shrinkage by adding a margin of +/- 2 cm to your illustration yourself.