OUTDOORSTAR Logo Doormat

OUTDOORSTAR Logo Doormat

OUTDOORSTAR is the outdoor doormat that offers the best scraping action to remove dirt stuck in shoe soles. Personalize it to your image with your logo , design, message , slogan ,...

• Durable Nylon Brush monofibers provide excellent scraping action .
• Solution dyed fibers for 100% UV resistance . Resistant to bleaching and chemicals.
• Optional drainage holes provide excellent drainage .
• Printed in HD on durable nylon monofibers.
• Can also be installed indoors .

Combine a maximum of 3 colors for the doormat including a maximum of 2 colors for the illustration among the 5 colors available and follow the instructions for transmitting your logo below.

Please indicate the external dimensions of the doormat OR the frame. We calculate the rest.

BE CAREFUL about the direction of travel.

PRESENTATION

The OUTDOORSTAR doormat is recommended for indoor and outdoor use at entrances, lobbies, reception desks or anywhere you want to display your company logo, slogan, artwork or message to customers/visitors or employees.

It is excellent for scratching action.

Specifications :

• YARN: Coarse continuous filament dyed in nylon solution.
• YARN WEIGHT: 1,300 g/m².
• PILE THICKNESS: 10 mm.
• TOTAL WEIGHT: 5.20 kg/m².
• PIMERY SUPPORT: 120 g/m² polyester spun non-woven.
• RUBBER BACKING: 100% Nitrile EXS™ rubber with high UV resistance and high resistance to carbon release. Compression molded with claw support for excellent dimensional stability.

PLEASE NOTE: We offer a wide choice of colors for your projects, ramps, doormat frames, but also integrated scrapers or brushes, a harder surface, personalized stainless steel marking, a design choice for outdoors, etc. .. On Request or to see on our other pages.

THICKNESS AND EDGE FINISH:

• ± 14 mm with 1.5 cm rubber edge (standing doormat)
• ± 14 mm without edge (built-in doormat)

The ±14mm doormat without edge can be placed in a pit and surrounded by a doormat frame.

The 1.5 cm wide rubber edge has a thickness of 3.1 mm.

DOORMAT UNDERLAYER:

The doormat is available in 2 different underlays.

1. Smooth sole: A smooth rubber sole.
2. Claw sole - Maxidrain : A sole raised by "nubs" and perforated in rubber, ideal for dirty places, on slopes or any other place where grip is not optimal, and allows water to pass through and facilitate drainage.

INSTRUCTION WHEN SENDING YOUR IMAGE-PHOTO-LOGO

NOTE: All projects are checked before studies and production of a “PROOF” proof.

Only YOUR VALIDATION of the “PROOF” triggers the production of your carpet, then preparation for shipment. Please note, no corrections can be made after validation and production of the BAT.

Instructions for obtaining the BAT after ordering:

1. You must take into account the dimensions ordered and the proportions of your sketch.
2. Your image should, if possible, be provided with the exact dimensions of the project (and in good definition)
3. You send us by email an image/photo of your project in JPG format (this is classic), PDF, PNG, PSD, TIFF, PNG or AI
4. You tell us the maximum 3 colors you want, clearly indicating which color for which use.
5. The image is uploaded by our computer graphics department and checked.
6. The image is resized following your ordered exterior dimensions. It is reduced, where applicable, by the thickness of the frame or the rubber edge
7. A BAT test is sent to you by email and/or to your customer account
8. You can request corrections or adaptations*
9. You validate, unequivocally, the proof by email.
10. We confirm and launch the production of your personalized and tailor-made carpet.

Attention :

• Take into account a margin of +- 3 cm on the edges of the image in order to manage tolerances
• Item color and print color may vary from the image shown on screen or on paper.
• You can send us the Pantone/RGB references of your logo to respect the marking colors. Without indication we will use standard colors. Technical deviations from Pantone/RGB colors must be tolerated.
• The BAT proof is sent in real size at 100%, unless the dimensions and/or a different percentage are indicated (for example 25%: the final result is therefore 4 times larger).
• Please check the proof carefully. After your approval from the proof, we are no longer responsible for errors in the text and/or logo and/or image.

* In order to avoid abuse, corrections to the BAT are possible within the limit of 3 studies. However, for the less experienced, participation in infographic services could be considered to obtain the desired project.

AVAILABLE COLORS

CODED	COLOR
B305	Black
B312	Gray
B417	Grey blue
B523	Blue
B421	Red

CHOICE OF DOORMAT FRAME

When ordering the custom frame, it is necessary to indicate the external dimensions of the frame . Our technical services will calculate the useful dimensions of the doormat.

In order to compensate for the thickness of the doormat frame, it may be necessary to provide a re-surfacing (Egaline type) of the doormat bottom or a rubber underlay of a few mm, see on this page "RUB - Rubber underlay rubber for entrance doormats"

PROMA-JAN - Aluminum - Natural - Height 16 mm

Frames for entrance doormats to be incorporated into the anodized aluminum colored paving, natural color

Profiles of 30 x 16 mm, 3 mm thick. Visible edge of 7 mm

Profile height: 16 mm - Doormat recess height: 12 mm

VER-ALU - Aluminum - Natural - Height 16 mm or 21 mm

Frames for entrance doormats to be incorporated into aluminum-colored paving, natural color

Profiles of 21 x 16 mm, 3 mm thick. Visible edge of 6 mm

Profile height: 16 or 21 - Doormat recess height: 10 or 15

VER-ALU - Aluminum - Natural - Height 31 mm

Frames for entrance doormats to be incorporated into aluminum-colored paving, natural color

Profiles of 31 x 26 mm, 3 mm thick. Visible edge of 6 mm

Profile height: 31 mm - Doormat recess height: 25 mm

PROMA-AN - Aluminum - Natural - Height 26 mm

Frames for entrance doormats to be incorporated into the anodized aluminum colored paving, natural color

Profiles of 30 x 26 mm, 3 mm thick. Visible edge of 7 mm

Profile height: 26 mm - Doormat recess height: 22 mm

PROMA-AR - Aluminum - Stainless steel color - Height 26 mm

Frames for entrance doormats to be incorporated into the INOX colored aluminum paving

They consist of 30/26/3 mm angles, the visible upper edge of which is 7 mm, and fixings.

Profile height: 26 mm - Doormat recess height: 22 mm

PROMA-GA - Aluminum - Anthracite Gray Color - Height 26 mm

Frames for entrance doormats to be incorporated into the ANTHRACITE GRAY aluminum paving

They consist of 30/26/3 mm angles, the visible upper edge of which is 7 mm, and fixings.

Profile height: 26 mm - Doormat recess height: 22 mm

VER-BLACK - Black lacquered aluminum - Height 31 mm

Frames for entrance doormats in black lacquered aluminum color (BLACK) composed of 31/26 or 26/31 mm angles, the visible upper edge of which is 6 mm.

Profile height: 31 mm - Doormat recess height: 25 mm

With possibility of anchoring tab.

PROMA-MS - Brass - Natural - Height 26 mm

Frames for entrance doormats composed of 30/26/3 mm natural brass (MS) angles, the visible upper edge of which is 7 mm.

Profile height: 26 mm - Doormat recess height: 22 mm

VER-LAI - Brass - Height 31 mm

Frames for brass-colored aluminum entrance mats (LAI) composed of 31/26 angles, the visible upper edge of which is 6 mm.

Profile height: 31 mm

Doormat recess height: 25 mm

With possibility of anchoring tab.

Please note, the thickness of the frame is 6 mm, possibly provide an underlay to compensate for the thickness.

TEXTILE

• YARN: Coarse continuous filament dyed in nylon solution.
• YARN WEIGHT: 1300 gr/m² .
• FIBER LENGTH: 10 mm.
• TOTAL WEIGHT: 5.20 kg/m².
• PRIMARY SUPPORT: 120 gr/m² polyester spun non-woven fabric.
• RUBBER BACKING: 100% Nitrile EXS™ rubber with high UV resistance and high resistance to carbon release. Compression molded with claw support for excellent dimensional stability.
• EDGE THICKNESS: 2.9mm
• WIDTH OF THE PERIFERAL BAND: 1.5 cm
• TOLERANCE: +/- 2%

HD digital printing is carried out on white fibers, specialized and durable dyes are sprayed directly onto the fibers (like current color printers).

During the drying process, the color fuses to the fibers for maximum hold over time.

The mat or doormat is then vulcanized onto the rubber in order to permanently fix the fibers.

SUPPORT & BACK

Semme Smooth or Claw - 3.1mm Rubber Maxidrain .

The printed mat can also be glued to the underlay or attached using Velcro or double-sided adhesive, etc. However, this reduces the options for care and maintenance.

ECOLOGICAL FOOTPRINT

The manufacturer is committed to reducing the ecological footprint for the production of its products.

For this reason, the products are made from 100% reusable energy and with local materials.

CLEANING INSTRUCTION

OUTDOORSTAR rugs can be cleaned in different ways.

1. They can clean in laundry/industrial cleaning (see laundering instructions).
2. Vacuumed regularly (daily in high traffic areas; weekly in low traffic applications).
3. Cleaned with extractor or hosed down as needed to remove heavy dirt. Hang to dry.

Mats must always be dry before being put back into service.

LAUNDRY WASHING INSTRUCTION

• Rinse, 2-3 min. on an average water level with a maximum temperature of 49°C
• Rinse (optional), 2-3 min. on an average water level with a maximum temperature of 49°C
• Break, 2-3 mins. on a high water level with a maximum temperature of 49°C
• Rinse, 2 min. on high water level with cold temperature
• Rinse, 2 min. on high water level with cold temperature
• Extract at low speed, 1-2 min.
• Shake with the rotating drum, 1 min.
• Extract, on a maximum of 250G, 3-5 Min.
• Dry (optional), 5-10 min. with a maximum basket temperature of 82°C
• Cooling, 5 min.

Additional recommendations:

• It is recommended to wash OUTDOORSTAR rugs separately from other rugs.
• For heavily soiled carpets, increase the temperature to max. 71°C.
• The rupture must not exceed a pH of 9.5; use non-ionic, low pH detergents.
• Do not overdry the carpets; The temperature of the dryer basket should not exceed 82°C.
• If the carpets are not dry, the final rinse can be increased to 49°C. This will reduce moisture retention after extraction.
• Lay rugs flat after removing them from the washer; allow mats to cool before rolling.