Wall paint - Non-solvent acrylic paint - IKO Pro

Wall paint - Non-solvent acrylic paint - IKO Pro

Non-solvent semi-gloss white acrylic paint .

Decorative and water-repellent protection of interior and exterior walls.

Suitable for brickwork , cementitious render , masonry , fibrous cement , concrete , plaster , etc.

Implementation :

The substrate must be in good condition, clean, free of grease and free from all loose particles.

If there are green deposits (algae, mould, etc.), remove them with a stiff broom and clean the surface with IKO pro Stop Green Deposits .

Apply a coat of IKO pro Primer Acryl on porous support.

Check the condition of the seals; first repair the seals in poor condition.

The application and drying temperature must be between 5°C and 35°C.

Stir the paint well before use.

Apply IKO pro Mural Paint by brush, roller or airless spray (0.025 inch opening).

Do not apply in humid weather, when there is fog or when there is a risk of rain in the hours following application. This could prevent the product from drying and causing it to dilute.

Color :

• White

Consumption :

• ± 0.2 L/m² in one or two coats.

Tool cleaning:

• Immediately in the water.

Technical properties:

• Dry matter: ± 54%
• Density: ± 1.3 g/cm³
• Viscosity: 20% Torque (Brookfield 25°C, spindle 6/20rpm)