1128 EPDM spray - Sprayable contact adhesive - Rectavit

1128 EPDM spray - Sprayable contact adhesive - Rectavit

Sprayable contact adhesive in a pressure canister , transportable , for bonding EPDM on residential flat roofs with a maximum surface of 100 m² .

Applications:

1. Glue bare EPDM
2. EPDM with felt underlay and other membranes with felt underlay on flat roofs up to 100 m²
3. Perimeter of the foundations
4. Window and door openings
5. For the construction of ponds and basins
6. on insulation
7. Metals
8. Wooden and stone supports

Properties :

• Heat resistance up to +100°C
• Applicable without electricity or compressed air
• Short evaporation time: 2 to 4 min
• Long peeling time: up to 60 min
• Type of glue: lace spray, up to 25 cm wide with the 9502 nozzle
• Method: double-sided, in full bath, the faces must be crossed
• Extremely fast drying and progressive adhesion strength
• Coverage: 40 to 80 g of dry glue/m² (= 4 to 7 s per running metre)*
• Yield: up to 100 m² of glued surface (up to 50 m² for double-sided gluing)
• Overlap: 50%
• Not repositionable
• Application temperature: +5°C to +30°C
• Shelf life: up to 18 months
• Care and cleaning: Rectavit Dissol (Spray)
• Does not contain carcinogenic components such as methylene chloride / DCM.
• Depending on the application, wind zone, roof height, type of membrane and support

Conditioning :

• 22.1L: Green