Stone R 1000 - Super Silica Deposit Remover - Zep Industries

Stone R 1000 - Super Silica Deposit Remover - Zep Industries

Super silica deposit remover that eliminates the most stubborn deposits and mixes instantly with water.

Properties :

• Does not color treated surfaces.
• Easy to apply.
• Non-flammable.
• The treated surface is properly renovated.
• Dissolves iron oxides deposited on cement and tiles.
• Strips cement floors, cement basins, tiles soiled by grease and silica deposits.

Instructions for use:

1. Depending on the extent of the deposits and stains to be removed, prepare a solution of 1 to 3 parts water.
2. Spray the solution over the entire surface to be stripped, and let it act for a few minutes.
3. Rinse thoroughly with pressurized water.
4. For better rinsing, use a pressure washer.
5. Note: Keep the container closed in a ventilated place.
6. STONE R 1000 is a very aggressive product: it is necessary to control its action by a preliminary test on tiled surfaces and to protect metal parts and glass surfaces from its attack.
7. Do not spray on windows.

Packaging:

20 L.

FAQ - Frequently Asked Questions

1. On what types of surfaces can I use Stone R 1000?
   It can be used on most acid-resistant mineral surfaces, including tiles, concrete, sandstone, terracotta, and concrete pavers. It should not be used on limestone (marble, bluestone, travertine).
2. Does Stone R 1000 remove cement residue?
   Yes, it is particularly effective at removing cement residue, laitance, mortar traces and residues after work.
3. How do I know if my surface is compatible?
   If the surface is calcareous, it may be damaged by the product. Always test on a small area first.
4. Is the product ready to use?
   No, it is usually diluted with water. The dilution depends on the level of soiling.
5. Can I use it on an outdoor terrace?
   Yes, it is perfectly suited for terraces, paving, concrete slabs and other acid-resistant mineral outdoor surfaces.
6. Is the Stone R 1000 dangerous?
   This is a powerful acidic product; handle with care. Use protective gear (gloves, goggles) and rinse the area thoroughly after application.
7. Is it effective against limescale?
   It acts on mineral deposits, but is not designed as a simple household limescale remover. It specializes in siliceous deposits and construction residues.
8. Can it be used indoors?
   Yes, but make sure there is good ventilation and rinse thoroughly.
9. After treatment, is it necessary to apply a protective product?
   It is recommended to apply a water repellent or surface protector once the stone has been cleaned to prevent future re-encrustation.
10. How much should I plan for?
    This depends on the dilution and the surface area to be treated. On average, 1 liter diluted can cover 10 to 20 m² depending on the condition of the surface.