Combibox flexifoam X-tra click & fix - PU foam - Soudal

Combibox flexifoam X-tra click & fix - PU foam - Soudal

The Flexifoam X-tra Click and Fix combibox is composed of 10 X Flexifoam X-tra Click & Fix 1 X Click & Fix gun 1 X Click & clean cleaner.

Flexifoam X-tra Click and Fix is a ready-to-use self-expanding one-component PU foam with elastic properties.

Features :

• High form stability (no shrinkage or post-expansion)
• High filling efficiency
• Click and Fix system for greater comfort of use
• 3 times more flexible than traditional PU foam
• Excellent adhesion on all substrates, except PE/PP
• Very good thermal and acoustic insulation
• Excellent characteristics for assembly
• Easy to apply, thanks to the use of the gun (precise dosage)
• Elastic and compressible
• Low expansion
• Very fast hardening
• Can be cut after 30 minutes (at 20°C)
• Permeable to water vapor
• Not resistant to UV rays
• Without freon (harmless for the ozone layer and the greenhouse effect)

Applications:

• All foam applications in static or non-static joints.
• Installation of windows and doors.
• Filling of cavities
• Installation and repair of ridge tiles
• Applying a Silent Layer
• Optimizing insulation in the field of refrigeration.

Manual :

1. Shake the aerosol for at least 30 seconds, or at least shake the can strongly 20 times.
2. Put the aerosol on the gun.
3. Slightly moisten the clean and degreased support, for a faster hardening of the foam.
4. Fill the voids only partially (approx. 80%), as the foam continues to swell.
5. Shake the can regularly during use.
6. In case of application of several coats, moisten the support between each coat.
7. Uncured foam can be removed using Soudal Foamcleaner or acetone.
8. Before using the cleaner, check if the surfaces are affected.
9. Plastics and layers of lacquer or paint can be particularly susceptible to this.

Content :

• 10 X Flexifoam X-tra Click & Fix
• 1 X Click & Fix Gun
• 1 X Click & clean cleaner.