Floor Polish Semi-Gloss - Self-shining floor wax - Zep Industries

Floor Polish Semi-Gloss - Self-shining floor wax - Zep Industries

Provides a semi-gloss , low-maintenance coating to the floor. The film formed after drying offers exceptional resistance to scratches and shoe marks . It is slip-resistant and suitable for use on most surfaces, including rubber, asphalt tile, vinyl, cork, sealed concrete, and terrazzo.

Properties :

• The film obtained after drying offers unparalleled resistance to scratches and shoe marks.
• Non-slip.
• Compliant with skid tests (ASTM D-2047), if properly maintained.
• Short preparation. Blends well with existing wax layers.
• Quick drying.
• Dries in approximately 30 minutes depending on ambient humidity.
• Easy to remove. Easily removed with Zep products: Special or DETSOL.
• Versatile as it is suitable for use on most surfaces such as rubber, asphalt tile, vinyl, cork, sealed concrete and terrazzo surfaces.

Applications:

Recommended as a semi-gloss floor wax in airports, hospitals, nursing homes, supermarkets, car dealerships, schools, shops, hotels, restaurants, sports clubs, gyms, industries and communities, etc...

Instructions for use:

1. Shake well before use.
2. For best results, first remove all old layers with SPECIAL or DETSOL.
3. Rinse thoroughly and allow to dry completely.
4. Next, apply several thin coats of FLOOR POLISH SEMI-GLOSS using a Floor Finish Applicator.
5. Allow approximately 30 minutes of drying time between each coat, depending on the circumstances.
6. For very long-lasting results, apply at least 3 coats.
7. Sweep to avoid dust and wash the floor as often as necessary with a neutral detergent.

Packaging:

5 Liters.

FAQ - Frequently Asked Questions

1. What is the difference between semi-gloss and high gloss?
   The semi-gloss finish offers a moderate and elegant shine, more discreet than high gloss, while better masking micro-scratches and marks.
2. Can it be used in a busy shop or office?
   Yes, Floor Polish Semi-Gloss is designed to withstand moderate to heavy traffic, making it perfectly suited for professional spaces.
3. Should the old wax be stripped before application?
   Yes, for optimal results and good adhesion, it is recommended to remove old layers of wax before a new application.
4. How many coats should be applied?
   Generally, 1 to 2 coats are sufficient. Two coats are recommended for high-traffic areas.
5. Is the floor slippery after application?
   No, when properly applied and dry, the wax provides good grip on walking, in accordance with standard professional use.
6. Can the soil be maintained after application?
   Yes, the floor can be maintained with a gentle damp cleaning or a spray method, without removing the protection.