Swab 5375 - 500mm hard 10mm diameter - Vikan

Swab 5375 - 500mm hard 10mm diameter - Vikan

This swab effectively cleans bottles, pipes and hard-to-reach surfaces , such as recesses and nooks on machines and conveyor belts.

Advantages & uses:

• Targeted & precise cleaning: thanks to its small diameter, this swab penetrates into restricted areas that conventional brushes cannot reach.
• Controlled rigidity: the hard fibers allow you to remove adhering residue without excessive bending, while respecting the surfaces.
• Hygienic safety: materials compatible with food contact and regulatory compliance provide reassurance in the food industry.
• Heat resistance: can be subjected to demanding cleaning cycles and sterilization.
• Cross-contamination prevention: available in several colors (color coded), useful in sites with strict hygiene.
• Versatile: Suitable for cleaning tubes, bottles, ducts, ventilation ducts, injection ports, etc.

Recommendations for use:

• Before first use, clean and sterilize according to internal procedures.
• Choose the color according to your hygiene code to avoid cross-use.
• Gently insert the swab, using a back and forth motion, rotating if necessary to reach the entire interior surface.
• After use: rinse thoroughly, disinfect, dry at a maximum temperature of 100°C.
• Do not exceed the indicated temperature and pH limits to preserve the integrity of the product.

Colors:

• Green: V5375/2
• Blue: V5375/3
• Red: V5375/4
• White: V5375/5
• Yellow: V5375/6

FAQ - Frequently Asked Questions

1. Is this swab suitable for food contact?
   Yes — the 5375 is designed for use in food contact areas. It complies with Regulation (EC) 1935/2004 and uses FDA-approved materials.
2. Can I sterilize it in an autoclave?
   Yes, it supports sterilization temperature up to 121°C.
3. Can it be put in an industrial dishwasher?
   Yes - it tolerates cycles up to 93°C.
4. How long does the swab last?
   This depends on the frequency of use, the aggressiveness of the cleaned media, and maintenance (cleaning, inspection). With normal use and good maintenance, it can last a significant time, but it will need to be replaced as soon as the fibers are worn or deformed.
5. Why are there multiple colors available?
   To facilitate the separation of tools between different areas and reduce the risk of cross-contamination. For example, assign each color to a different production area (raw material, washing area, finished product area).
6. What is the visible length of the fibers?
   About 3 mm.
7. Is this model suitable for cleaning pipes with an internal diameter of 10 mm?
   Yes, the 10mm swab is designed to fit into tubes or conduits of compatible dimensions. However, sufficient clearance must be ensured to allow passage without jamming.
8. Is the product environmentally friendly / BPA-free / phthalate-free?
   Yes, it is designed without BPA or voluntarily added phthalates. Pierre & Sol also complies with REACH regulations.