Fine Brush Kit 5362 - Diameters 2, 5, 6mm soft - Vikan

Fine Brush Kit 5362 - Diameters 2, 5, 6mm soft - Vikan

Ideal for cleaning very small nozzles and valves on machines such as coffee or juice machines, this cleaning set includes three brushes of Ø2 mm, Ø5 mm and Ø6 mm.

Benefits & Recommended Uses:

• Precise cleaning of small orifices: ideal for nozzles, valves, dosing heads or internal machine conduits.
• Soft fibers: clean effectively without scratching delicate surfaces.
• Adaptability: Thanks to the three different diameters, various hole sizes can be adapted in a single kit.
• Enhanced hygiene: easy-to-clean material, simple visual inspections, sterilization possible for the most critical uses.
• Food compatibility: designed to meet the requirements of the food industry.
• Durability: stainless steel structure + polyester fibers ensure good resistance to repetitive cleaning cycles.

Recommendations for use and maintenance:

• Select the brush with the diameter most suited to the hole to be cleaned (avoid forcing it into an hole that is too small).
• Use a gentle back and forth action to avoid marking the inner surface.
• Rinse thoroughly after use, ideally in hot water.
• Sterilize or put in the dishwasher depending on the constraints (compatible temperatures).
• Inspect the bristles regularly: if they are damaged or deformed, replace the affected part to ensure optimal efficiency.

Typical applications & sectors of use:

• Professional coffee machines.
• Juice machines, extractors.
• Beverage dispensing equipment.
• Fluid dosing devices.
• Food or pharmaceutical production lines.
• Laboratories where precision and hygiene are required.

Colors:

• Blue: V 5362/3
• Red: V 5362/4
• White: V 5362/5

FAQ - Frequently Asked Questions

1. Is this kit suitable for food contact?
   Yes. The materials comply with food contact standards (EC 1935/2004) and the product complies with Good Manufacturing Practices guidelines.
2. Up to what temperature can they be sterilized?
   Dishwasher: up to ~93°C (Standard cycle). Autoclave: up to 121°C.
3. What color(s) is it available in?
   Blue, red or white (codes V5362/3, V5362/4, V5362/5).
4. Can it be used to clean very fine nozzles (< 2 mm)?
   The kit includes a Ø 2 mm brush as the smallest diameter. For smaller holes, you will need an even finer brush not included in this kit.
5. How long does a bottle brush last?
   It depends on usage (frequency, pressure, abrasiveness). It is recommended to regularly check the condition of the fibers - as soon as they are frayed or withered, the brush must be replaced.
6. Is the kit sold individually or as a pack?
   Each kit includes three brushes (Ø 2, Ø 5, Ø 6 mm).