Vernis - High resistance interior polyurethane varnish - Linitop

Vernis - High resistance interior polyurethane varnish - Linitop

Linitop Varnish is a high-resistance colorless interior varnish for protection and decoration for all wood.
Enriched with polyurethane resins for enhanced resistance to abrasion and water.

Properties :

• Decorates, waterproofs wood and highlights it.
  Protects it against dirt.
• Perfectly resists abrasion and scratches.
• Ensures optimal protection of the support.
• Very high brushability.
• Apply to old, clean, adherent and frosted varnishes.
• Does not blister or peel.
• Washes easily.

Destinations:

All wood except species containing anti-oxidant agents.
Interior woods exclusively Hard and soft woods except Red Cedar and Iroko.
Doors, frames, windows and interior paneling, furniture, table tops, stair railings, etc.

Features :

• Composition : Polyurethane-modified alkyd resins
• Finish : Satin/Matte/Glossy
• Use : Interior
• Yield : 18 m² per liter per coat depending on condition and porosity of the support and method of application
• Application equipment : Brush, roller, gun
• Drying :
  
  • Dust free: 5 hours
  • Recoverable: 24 hours
• Cleaning tools : White spirit
• Shelf life : 2 years minimum in original, unopened closed packaging

Manual :

1. Use a lacquer roller (short-hair wool type).
2. Apply 2 coats of VARNISH in the direction of the grain of the wood, cross the passes, evening them out.
   Respect as much as possible the topography of the support for the application.
   Be careful not to stop the application in the middle of the surface to avoid repeats as much as possible.
3. Start at the edges then cover the entire surface, working in areas of a maximum of 2 m by 2 m.
4. Allow 24 hours to dry between coats.
5. On particularly absorbent wood, apply 3 coats.
6. For an optimal finish, it is recommended to carry out fine sanding (280 grit) between each coat.

Conditioning :

250ml, 0.75L and 2.5L.