TC tankclean steam - Liquid alkaline cleaner - Zep Industries

TC tankclean steam - Liquid alkaline cleaner - Zep Industries

Liquid alkaline cleaner , formulated for use in hot water, steam or ultrasonic vibration cleaning systems .
Removes stubborn dirt , old grease and lubricants.

Also contains a descaling additive that slows down the formation of limescale.
Can be used in the food industry.

Properties :

• In most cases it is very powerful even in a dilution of 0.5 to 3%.
• Does not clog nozzles.
• Contains additives that treat hard water and prevent limescale buildup.
• Neutral on seals and rubber.
• Surfactants are more than 90% biodegradable.

Applications:

TC TANKCLEAN STEAM is recommended for the following applications: Internal cleaning of tanks and containers.

Instructions for use:

Steam cleaning:

1. Depending on the degree of soiling, inject/vacuum into the steam cleaning device 0.5 to 3% of TC TANKCLEAN STEAM.
2. Then spray the mixture of detergent and steam under pressure in aerosol form (mist) onto the soiled parts.
3. Once the cleaning process is complete, rinse thoroughly to remove any remaining cleaner.

High-pressure sprayer:

1. Depending on the degree of soiling, inject/vacuum into the high-pressure sprayer 0.5 to 3% of TC TANKCLEAN STEAM.
2. Then spray the cleaner and water mixture under pressure onto the soiled parts.
3. Once this process is complete, rinse thoroughly with water to remove any remaining cleaner.

Packaging:

20 L and 1000 L.

FAQ - Frequently Asked Questions

1. Is this product suitable for the agri-food sector?
   It can be used to clean surfaces in areas not in direct contact with food. For areas in direct contact, use a food-grade detergent.
2. Can it be used with a steam cleaner?
   Yes, it is specifically designed to be compatible with steam cleaning and activities requiring high alkalinity.
3. Does it attack metals?
   It is safe on stainless steel and treated metals. However, it should not be applied to unprotected aluminum or certain alloys sensitive to alkalis.
4. Is it effective on old and carbonized fats?
   Yes, the high-performance alkaline formulation can remove even very stubborn residues.
5. Do I need to rinse after use?
   Yes, rinsing with clean water or high pressure is mandatory after application.
6. Can it be used in a CIP system?
   Absolutely, the product is CIP compatible with a low dilution (1–3% depending on fouling).
7. What is its main action?
   Intensive industrial degreasing, removal of oils, greases and persistent organic or chemical deposits.
8. Does the product generate a lot of foam?
   The foam is controlled and sufficient to adhere to the walls, but easy to rinse off.