Stainless steel grid drainage channel - Euroline Inox - ACO

Stainless steel grid drainage channel - Euroline Inox - ACO

Like " Galva ", Euroline Inox can be used without limit anywhere in the garden. The visual effect created by the longitudinal bars reflects pure class!
AISI 304 brushed stainless steel , which we will now call stainless steel, is a real added value for the garden and guarantees durability over the years.
We don't invest in a stylish terrace every year!

The 'Inox' longitudinal walkway grid is particularly appreciated on bluestone or granite terraces.
Although we are seeing a trend where the grid is used as a transition element between 2 types of modern paving , such as terracotta pavers and natural stone, or even a thin layer of permeable basalt or dolomite of a side.
The brushed surface treatment gives the stainless steel a classy appearance, in keeping with the natural character of the exterior environment.

The robust grate structure is constructed in such a way that the interior of the gutter is not visible while the collection capacity remains high.
Another advantage is that leaves, gravel and other dirt do not fall into the gutter, thus avoiding reducing the flow.
Euroline gutters are available in heights of 10 and 6 cm for those who are limited by the installation height.

This stainless steel perimeter grid is often used as an overflow for the outdoor swimming pool. Stainless steel resists chlorine well.
The fine structure also allows you to walk barefoot on the grid.

Material :

Polyester concrete is a conglomerate of quartz aggregates (0 to 8 mm grain) bonded by polyester resin. Polyester concrete is resistant to mineral acids, road salts, mineral oils, fuel oil, gasoline and most acids and bases.

Superimposed and fixed gangway grille in brushed stainless steel (AISI 304). The grid is standardized for resistance class A 15 kN (Places accessible to pedestrians and cyclists).

Technical data :

Euroline 60 model:

• Height without grille: 55 mm
• Height with grille: 58 mm

Euroline 100 model:

• Height without grille: 95 mm
• Height with grille: 98 mm

Grid :

• Length: 50 cm or 100 cm
• Entrance section: 440 cm²/m
• Resistance class: A 15 kN (Places accessible to pedestrians and cyclists).
• AISI 304 brushed stainless steel

Choose your model based on the desired flow rate.

The desired flow rate depends on the rainfall, the surface area of the area to be drained and the draining capacity of the soil. Depending on the desired flow rate, the outlet placed at the end or below the gutter must be sized accordingly. The Euroline 100 has a greater water retention volume.

• Interior width: 10 cm
• Exterior width: 11.8 cm

Euroline 60 Inox

Product	Length	Internal width	Ext. width	Height	Kg/piece
100 cm drainage channel	50	10	11.8	5.8	8.2
100 cm drainage channel with 110 mm vertical outlet	100	10	11.8	5.8	8.3
100 cm drainage channel with pre-mark for 110 mm vertical outlet	50	10	11.8	5.8	8.2

Euroline 100 Inox

Product	Length	Internal width	Ext. width	Height	Kg/piece
50 cm drainage channel	100	10	11.8	9.8	5.1
100 cm drainage channel	50	10	11.8	9.8	10
100 cm drainage channel with 110 mm vertical outlet	100	10	11.8	9.8	10.2
100 cm drainage channel with pre-mark for 110 mm vertical outlet	50	10	11.8	9.8	10

Attention :

• The body of these gutters being made of polymer concrete, they are quite fragile. We therefore authorize ourselves to decline any order that is too small or the risk of breakage is too high.
• Any order with complicated logistics or too small a quantity can be directly collected by the customer.
• If, however, a breakage occurs during the transport of the gutters, when it is a simple breakage, it is possible to glue the gutter back together.