Belgian bluestone tile - Old & Luxury Finish - CUSTOMIZED

Belgian bluestone tile - Old & Luxury Finish - CUSTOMIZED

Belgian blue stone slab or tile in old and old or luxurious finishes that make stone nobility for your ancient or contemporary spaces.

THE BELGIAN BLUE STONE IS TIMELESS AND MODERN

Natural and real Belgian blue stone (with warranty) in current choice and choice marbrier cut to your measurements, depending on your notebooking, your project, the dimensions of your building, corridor, rooms,....

• 2 to 8 cm thick
• Finishes adapted to the thickness to reduce the slab breakage at the installation.

All other formats and finishes can (or could:)) be made on request if the quantity is sufficient.

The bespoke blue stone technical elements can be found on this page: Elements in Stone ON MESURE .

The dimensions standardized by steps of 10 cm are less expensive, to see on the dedicated pages: Classic format

Survey tips:

Measurements in cm, length x width in cm

Tolerance: Thickness - 10%.  Length and width - 1.5mm.  A lower tolerance is practiced for the "marbrier choice".

Provide a 3mm joint for the inside. The typical antique finishes allow joints up to 8 mm. 

Time:

2 to 6 weeks

Packaging and packaging:

We take care to adapt the packaging to the type of order.  If necessary, for large sizes, additional fees could be proposed.

Customer removal is the cheapest packaging solution.

Choice and quality of the blue stone of Belgium:

Certificates guaranteeing traceability can be provided on demand.

There are 3 main choices in stone, The marbrier choice (the most qualitative), the current choice and the third choice. This last quality is not sold by Pierre-Sol, except in some antique or aged finishes that justify the presence of defects.

Current choice (or technical or current building): The vast majority of productions are made in common choices, especially for classic finishes. 

Choice marbrier (or first choice): This choice is intended for exceptional pieces made by a stonemason or projects requiring significant precision in the measurement tolerance. The stone has very few defects. 

Finishes and aesthetics:

ANTIQUE FINITIONS 

EnoPasso finish. Modern finish from dark grey to satin black, as patinated by time and soft to the touch

DESIGN FINITIONS

Flamme finish. A specifically mechanical finish obtained by passing a jet of flame on a slice of sawn stone. The heat shock causes the surface grains to burst and gives the specific texture of this finish.

EnoSkin Design finish. Special series finish of a beautiful homogeneous light grey, slightly grainy with a soft and structured appearance. Slip

attention:

1. For logistical reasons: parts larger than 155 cm in length could be divided into equal parts of up to 155 cm.
2. For logistical reasons: orders that are too small or too light may be declined. In general, the minimum order is 10 square meters.
3. All orders with problematic or too low logistics can be removed directly by the customer. :-)
4. The measurements indicated for the order are the maximum measurements of the stone: thickness, length, width,... 
5. We take care to check the orders to validate the technical feasibility and/or the right uses.