Silicone for Mirror - Akemi

Silicone for Mirror - Akemi

AKEMI Silicone Mirror is a one-component, air-drying silicone rubber -based adhesive specially designed for bonding and mounting mirrors.

Features :

• Odorless
• Fast vulcanization and high shear strength
• 10 to 15 minute film formation time
• Emission class A+ (confirmed by an external research center)

Use :

1. Contact surfaces must be dry, clean, free of grease and dust; use AKEMI I cleaner for cleaning the support.
2. The mirror should be evenly coated, protected with a layer of varnish and free from scratches.
3. Suction substrates such as raw wood, concrete, walls or any other similar material must be pre-treated with AKEMI Primer AP 10.
4. Processing temperature from +5°C to +40°C
5. Apply the product and squeeze the mirror in an interval of 10-15 minutes.
   Per square meter of mirror and depending on the thickness of the glass, apply at least 3 to 4 vertical beads of adhesive; after pressing the mirror on the support, they should not exceed a width of 10-12 mm.
   Air must be able to circulate freely around the edges of the mirror.
6. Hardening depends on layer thickness, temperature and relative air humidity.
   It is about 24 hours.
7. Until completely hardened, a secure and precise fixing of the mirror is necessary (eg by means of adhesive strips, wedges, etc.).
8. Working tools can be cleaned with AKEMI Nettoyant A.

Conditioning :

310mL cartridge.

Color :

White.