Self-adhesive lead - Replaces construction lead - Aquaplan

Self-adhesive lead - Replaces construction lead - Aquaplan

Self-adhesive lead is a real lead that can be used in one piece.
This sinker has a self-adhesive layer of butyl and a protective coating .

Very easy to apply on roofs and facades .
Universally usable for all construction details.

Benefits :

• real lead
• Environmentally neutral
• The whole roll length is 3m
• Adherent on brick wall

Application :

Can be used for all construction details, replacing or repairing flashings or flashings, for chimney (roof) connections, above-ground masonry, window frames, siding top finishes, ceramic tiles, slates…

Manual :

1. Do not use lead strips longer than 1.5m.
2. Do you need longer lengths?
   Then fabricate a tie tab/staple joint.
   If the lead is embedded in the masonry, then you can make a transverse overlap 10 cm wide.
3. You can easily cut or shear Custom Self-adhesive Lead.
   To do this, use tin snips or a cutter placed along a steel ruler.
4. To avoid any oxyation, we advise to treat the lead with a patinating oil.

Conditioning :

• 3 running meters with a width of 20 cm.
• Gray.