Compact expanding foam - Manual PU foam - Soudal

Compact expanding foam - Manual PU foam - Soudal

With COMPACT you work precisely and you're done in no time.
This PU foam is suitable for indoor and outdoor use and is sufficient for most small jobs.
That's all you need!

• A crack in the wall?
• Seal a cavity?
• Or caulk a heating pipe?
• Isolate the interstices?

Features :

• High form stability (no shrinkage or post-expansion)
• High filling efficiency
• Compact system for quick and easy use
• Excellent adhesion on all substrates, except PE/PP
• Very good thermal and acoustic insulation
• Excellent characteristics for assembly
• Not resistant to UV rays
• Without freon (harmless for the ozone layer and the greenhouse effect)

Applications:

• Filling of cavities
• Installation and repair of ridge tiles
• Applying a Silent Layer
• Optimizing insulation in the refrigeration sector
• Insulation of window and door frames and window sills
• Insulation around pipes and electrical wiring

Manual :

1. Shake the aerosol vigorously for 20 seconds.
2. Remove the detachable part on the adapter.
3. Moisten the dusted and degreased surface.
   For unusual substrates, it is advisable to carry out an adhesion test.
4. Hold can upside down and fill joint or cavity 1/3 full as foam continues to expand as it cures.
5. Once activated, use the foam within 20 min.
6. Shake regularly during use.
7. If multiple coats are applied, moisten between coats.
8. Uncured foam can be removed with cleaner or acetone.
9. Before using the cleaner, check whether the surfaces are affected.
10. Plastics and layers of lacquer or paint can be particularly susceptible to this.
11. Hardened foam can only be removed mechanically, with Soudal PU-remover.

Conditioning :

• 150ml