Reveblak 9 - High-temperature black coating - Zep Industries

Reveblak 9 - High-temperature black coating - Zep Industries

High temperature black coating to protect all metal parts subjected to peak temperatures of 650°C and continuous temperatures of 600°C.
Excellent matte black appearance and is ideal for boilers, chimneys, exhaust pipes and motorcycles.

Properties :

• It gives a very nice taut line.
• Excellent matte black finish.
• Quick drying.
• The aerosol allows for easy application.
• It can be used as a coating for pipes, boiler bodies, chimney bodies, car and moped exhaust pipes, etc.
• Protects all metal parts subjected to high temperatures.
• Very good resistance to gasoline, water and weathering after hardening.
• Excellent adhesion to bare metal.

Applications:

Maintenance services, plumbers, heating engineers, garage mechanics, garden machinery, etc.

Instructions for use:

1. In all cases, apply to a rust-free, degreased and dry surface.
2. Shake the aerosol can vigorously before use and occasionally during application.
3. Spray evenly from a distance of 25/30 cm over the entire surface, holding the aerosol can vertically.
   For effective protection, it is best to apply Reveblak 9 in several thin coats rather than one thick coat; wait a few minutes between applying each coat.
   For optimum adhesion and hardening, allow the substrate to dry at room temperature for approximately 1 hour, then heat for 30 to 50 minutes at a temperature of 250°C to 300°C.
4. After use, turn the aerosol upside down and press the valve for a few moments to prevent it from clogging.

Packaging:

0.5 L aerosol.

FAQ - Frequently Asked Questions

1. What is the maximum temperature that Reveblak 9 can withstand?
   Reveblak 9 can withstand temperatures up to 650°C, making it perfectly suited for equipment exposed to intense heat.
2. Can Reveblak 9 be used outdoors?
   Yes, the product is designed to withstand outdoor conditions, provided the surface is properly prepared before application.
3. On what surfaces can Reveblak 9 be applied?
   It is primarily intended for use on metal surfaces such as steel or cast iron. Surfaces must be clean, dry, and free of grease.
4. How many coats should be applied?
   It is recommended to apply one to two thin coats to obtain an optimal and even result.
5. Is the product corrosion resistant?
   Yes, Reveblak 9 offers excellent corrosion protection, even in high heat conditions.
6. Is heat treatment required after application?
   A gradual temperature increase after drying helps to optimize the performance and durability of the coating.