Antirust 2 - Rust-preventative primer and finish - Zep Industries

Antirust 2 - Rust-preventative primer and finish - Zep Industries

It penetrates rust and slows down corrosion and can be applied directly to any metal surface.
For indoor and outdoor work.

Properties :

• It penetrates rust and slows down corrosion.
• Protects all metals against rust formation.
• Can be applied directly to any metal surface.
• Resistant to salty, humid or sulfurous environments.
• Economical to use; requires no rust removal, no phosphating or application of a primer.
• Quick drying, long-lasting results.
• Beautiful satin finish.
• Unleaded.
• For indoor and outdoor work.

Instructions for use:

1. Degrease and dust if necessary.
2. Remove loose rust and mill scale by brushing to obtain a clean surface.
3. For the application:
   Apply the product in two coats using a brush.
   When using a spray gun, dilute 10 to 20% with paint thinner.
   In a soaking bath, dilute to 30%. For good protection, two coats are preferred to one.

Packaging:

5 kg: Green, Grey, White and Yellow.

FAQ - Frequently Asked Questions

1. Can Antirust 2 be applied directly to rust?
   Yes, it can be applied to a slightly oxidized surface after removing loose rust. It acts as a corrosion inhibitor.
2. Should a primer be applied before Antirust 2?
   No, it's a 2-in-1 product: it replaces both the primer and the topcoat.
3. Is it compatible with all metals?
   It is optimized for ferrous metals. For non-ferrous metals (aluminum, stainless steel, galvanized steel), an adhesion test is recommended.
4. Can it be used outdoors?
   Yes, Antirust 2 is designed to withstand weathering, UV rays, temperature variations and humidity.
5. What is the yield of the product?
   On average 7 to 10 m²/L depending on the substrate and desired thickness.
6. How many coats should be applied?
   One coat may be sufficient, but 2 coats are recommended for maximum protection.
7. What is the drying time?
   Variable depending on conditions, generally: Touch dry: 1 to 2 h Re-layable: 6 to 12 h Complete drying: approximately 24 h.
8. Can Antirust 2 be applied with a spray gun?
   Yes, it can be diluted slightly according to the manufacturer's recommendations for spray application.
9. Is it suitable for industrial environments?
   Absolutely, it is formulated for intensive and professional use.