Acrylic Varnish - Interior acrylic varnish - Linitop

Acrylic Varnish - Interior acrylic varnish - Linitop

Linitop Acryl Varnish is a colorless protective and decorative varnish for interior wood enriched with PU resins for longer resistance to abrasion and water.
Very easy to apply.

Very nice rounded shape (stretched) and beautiful finish because it is very filling.
It doesn't blister or flake.

Properties :

• It decorates, waterproofs the wood and enhances its appearance.
• Enhanced resistance to abrasion, scratches and water splashes.
• Ideal for damp rooms such as bathrooms or kitchens.
• Very easy to apply
  Does not blister or peel. Washable
• Can be applied to old, clean, adherent and roughened varnishes.
• Odorless.
  Dries quickly.

Destinations:

Interior wood only:

Protects and decorates door and window frames, interior paneling, furniture, stair railings, kitchens, doors,...
New or previously varnished wood except for wood containing an antioxidant (e.g., Iroko...).

Features :

• Composition : Hybrid acrylic polyurethane resins
• Finish : Matte/Satin/Gloss
• Use : Indoor
• Coverage : 12 m² per liter per coat, depending on the condition and porosity of the substrate and the application method.
• Application equipment : Brush, roller, spray gun
• Drying :
  
  • Dust-free: 1-2 hours for the spray
  • Recoverable: 6 hours
  • Complete drying time: 36 to 48 hours
  • Hardening time: 5 days.
• Cleaning tools : Immediately with soapy water
• Storage : Minimum 1 year in unopened original packaging

Instructions for use:

1. Apply 2 coats of ACRYLIC VARNISH in the direction of the wood grain, cross the passes and even them out.
   Respect the topography of the support as much as possible for the application.
   Take care not to stop the application in the middle of the surface to minimize the need for rework.
2. Start with the edges and then do the whole surface, working in sections of no more than 2m x 2m.
3. Allow 6 hours of drying time between coats.
4. On bare wood, for the first coat, dilute with water at 10%, same when applying with a spray gun.
5. On particularly absorbent wood, apply 3 coats.
6. For an optimal finish, it is advisable to carry out fine sanding (280 grit) between each coat.
7. When using an aerosol, shake well before use until the mixing ball detaches.
   Apply at a distance of 15 to 20 cm from the surface.
   The application must be done while moving to avoid overdosing and dripping.
8. An aerosol application does not eliminate the need for rigorous surface preparation as described above.
9. A spray application used for touch-ups may show variations in gloss; if possible, apply a smooth, even coat over the entire surface to be treated.

Packaging:

250 ml and 0.75 L.

FAQ - Frequently Asked Questions

1. Can Linitop Acrylic Varnish be used outdoors?
   No, this varnish is strictly for indoor use only. For outdoor use, it is recommended to use a varnish or stain specifically formulated to resist UV rays and weathering.
2. Is it compatible with parquet flooring?
   Yes, for moderate domestic use. For high-traffic areas, a specific floor varnish is preferable.
3. Is it necessary to sand before application?
   Yes, for raw wood, light sanding and dusting. For wood that is already varnished or painted, lightly sand to improve adhesion.
4. Does nail polish yellow over time?
   No, thanks to its acrylic formulation, Acryl Vernis Linitop does not yellow and preserves the natural color of the wood.
5. Can it be tinted?
   This varnish is designed to be used as is. For a tinted finish, it is recommended to apply a wood stain before varnishing.
6. Is it dangerous for indoor use?
   No, the product has a low odor, is free of harsh solvents, and is suitable for living areas (living room, bedroom, office).
7. How to maintain a varnished surface?
   A simple cleaning with a soft, slightly damp cloth is sufficient. Avoid abrasive products or solvents.