GT Wash & Go - Active foam shampoo - Guard Industrie

GT Wash & Go - Active foam shampoo - Guard Industrie

GT Wash & Go is a new generation degreaser and slag remover shampoo.
It is very effective in removing milk , oils and fats as well as road film.

GT Wash & Go is not classified as corrosive, which increases safety during its use.
Without phosphate, soda or potash, it has been designed to meet the different requirements of applicators in terms of efficiency, safety and implementation.

Advantages

• High performance efficiency
• Strong degreasing power, eliminates road film and makes the bodywork shine
• Fast action
• Does not attack materials
• Maintains user safety

Use

• Ideal for the maintenance of construction equipment: metal formwork and formwork, concrete skips, powder tanks, mixer trucks, etc.

Implementation

1. It is essential to carry out preliminary tests and to wear personal protective equipment.
2. Do not mix with other products. The product can be used pure or diluted with water (1 volume of product for 1 volume of water).
3. Spray the product evenly using a low pressure hand sprayer.
   Its slightly foaming appearance makes it easy to check the uniform application over the entire surface (tracer effect).
4. Leave to act for 5 to 10 minutes.
5. Brush the treated surface with a medium-hard brush. The mechanical action allows more residue to be removed.
6. Rinse the entire surface and equipment with plenty of water using a water jet or high pressure cleaner.
   Repeat the operation if necessary.

Application tools

Apply with a low pressure sprayer.

Consumption

3 to 5 m²/L.

Conditioning

10 L and 220 L.