Mold Protector - Mold Prevention in Grout - HG

Mold Protector - Mold Prevention in Grout - HG

A practical spray that prevents mold from growing in the bathroom and other places where it grows rapidly.

It makes surfaces waterproof and airtight .

• Prevents mold growth
• Suitable for tile joints , silicone joints , stucco , etc.
• Not suitable for wallpaper and porous surfaces .

Mold often appears in damp rooms, such as the bathroom.

They need nutrients, moisture, and time to develop, and they particularly thrive in humid environments. Removing any one of these three elements will prevent their growth.

HG mold protector seals the surface so that mold no longer has a source of nutrients and moisture cannot remain on the surface for long.

Instructions for use:

1. If mold is present on the surface to be treated, it must first be eliminated with HG mold destroyer.
2. Before applying HG mold protector, thoroughly clean and dry the surface.
3. Next, apply the liquid opaquely and let it dry for approximately 30 to 60 minutes.
4. Wipe smooth surfaces if necessary within 10 minutes of application.
5. Repeat the treatment at least once every 2 months.

A 500ml bottle is sufficient to treat 10-12 m².

Packaging:

• 500 ml

FAQ - Frequently Asked Questions

1. Does this product eliminate existing mold?
   No, this is a preventative product. To eliminate existing mold, you must first use a mold cleaner, then apply the protector to prevent its return.
2. How often should the protector be applied?
   The duration depends on the room's humidity. Generally, one application every 3 to 6 months is sufficient. In a shower that is used frequently, more frequent application may be necessary.
3. Can it be used on all types of joints?
   Yes, it is suitable for: cement joints, silicone joints, wall and floor joints. However, always test an inconspicuous area beforehand.
4. Is the product dangerous to health?
   No, if used according to the instructions. Like any household product, it must be handled with care, in a well-ventilated area, and kept out of reach of children.
5. Can you walk on the surfaces immediately after application?
   Allow to dry completely before any contact. Drying time depends on the amount applied but is generally about 30 minutes to 1 hour.
6. Is the smell strong?
   The product has a light odor, which disappears quickly once dry.
7. Can the protector be used outdoors?
   It is primarily designed for indoor use. For outdoor applications, choose a product specifically suited to the weather conditions.
8. Can it be used on paint or plaster?
   Yes, if the surfaces are painted and completely dry. However, avoid unprotected raw plaster.