AK2 Finish Crystallizer - Akemi

AK2 Finish Crystallizer - Akemi

For the treatment of new and old floors in limestone or reconstituted stone previously treated with Akemi Cristallizing Base AK1.

The resistance to wear of the surface increases under the effect of a chemical reaction, a well-dosed formulation induces an increase in gloss combined with a reviving of the color as well as an anti-slip action.
Dull spots and streaks can be removed after repeated applications.

Features :

• Polishing of marble, limestone, terrazzo without layer formation
• Gets a high shine
• Increases the anti-slip function
• Improves the surface of the stone
• Reduces soiling, facilitates maintenance
• Strengthens structure and color
• Ideal for renewing polish or already crystallized floors
• Very easy to use
• Little noise, dirt and dust during use

Use :

1. Shake before use.
2. The surface must be clean, dry and free of layers.
3. Pre-treatment with AKEMI Cristallizing Base AK 1 is recommended.
4. The optimum temperature for use is between 15 and 25°C; switch off the underfloor heating well in advance, avoid direct exposure to the sun.
5. Only treat a small area of 2 to 3 m² per section.
6. Regularly spray approximately 10 to 20 ml/m² of the product and immediately polish using a heavy monobrush (min. weight 50 kg; approx. 150 rpm) and a fine stainless steel wool pad and a plastic (e.g. bronze crystallization pad) in criss-cross motions beyond drying until the desired level of gloss is achieved. If necessary, repeat the operation once or twice.
7. Sweep or vacuum the floor after treatment.
8. The surface is usable immediately after treatment.
9. For routine cleaning and maintenance AKEMI Savon Pierre is recommended.

Conditioning :

5 liter container.