Sanit-Etanche - Waterproof screen before tiling - Aquaplan

Sanit-Etanche - Waterproof screen before tiling - Aquaplan

Seals all the supports in your bathroom or your kitchen , in an effective and decorative way.

In addition, Sanit-Étanche forms an essential waterproof screen before laying tiles .
You can use Sanit-Étanche on all supports: wood , plasterboard , ceiling , concrete , etc.

Benefits :

• Guarantees 100% waterproof before finishing the bathroom or kitchen
• For all kinds of media; wood, plasterboard, ceilings, cellular concrete
• Environmentally friendly and safe to use
• Easy to apply

Application :

Can be used on all substrates, even wet ones such as wood, plasterboard, cellular concrete, ceilings, cement screeds, masonry, etc.

Useful information:

• Store in a cool place (max. 20°C) and protected from frost.
• Only suitable for indoor application.
• Not suitable for sealing "basins" in which water is permanently stored.
• Clean tools with water immediately after completion of work.

Manual :

1. Dust and degrease the support first.
2. Seal any cracks and crevices and fill the holes with STOP-LEAKS .
3. Level the substrate first if it is too rough before tiling.
4. Shake SANIT-ÉTANCHE before use.
5. Apply a first coat of SANIT-ÉTANCHE with the brush or the roller at a rate of approx. 0.15 l/m².
6. Reinforce after 2 to 3 hours approx. (20°C) all connections between walls and floor with ANTI-FISSURES .
   Always consolidate the horizontal angles first, then the vertical angles.
7. Apply a 2nd coat of SANIT-ÉTANCHE immediately after reinforcing all angles.
8. Apply an additional coat around pipes and drains.
9. Leave the assembly to dry for approx. 12 h (20°C) before using the space or tiling it.
   Ventilate the area well to speed up the drying process.

Conditioning :

• 0.7L and 2L.
• White.