ImperGuard Premium - High performance waterproofing - Guard Industrie

ImperGuard Premium - High performance waterproofing - Guard Industrie

High-performance water protection for all porous materials in the building.
ImperGuard Premium is a waterproofing that deeply protects porous materials against stormwater penetration and thus avoids the harmful effects due to infiltration, acid rain, erosion, freeze/thaw cycle, moss and lichen formation, efflorescences...

ImperGuard Premium is a next-generation non-filmogenic impregnation product. It is colorless after application, it does not change the appearance (no risk of bleaching) or the nature of the treated medium. Very good resistance to U.V., it does not yellow.

Benefits:

• Water and moisture protection
• Smellless and invisible: does not whiten
• Limits the development of mosses
• Efficiency 5 years
• Does not form a film, lets the support breathe
• UV and frost resistant

Use:

• Porous materials: natural or reconstituted stone, concrete, terracotta, coating, slate, etc.
• Facades, walls and roofs
• New or old
• Outside

Preparing support:

• Apply the product to a clean, dusted, grease-free and dry surface. To remove black marks, pollution or dirt invading materials use Wash'Guard or Wash'Guard Express.
• Rinse thoroughly until the surface is free of any trace of the cleanser.

Application:

• Use the product in its purest form: do not dilute.
• Shake the packaging well before use and do a pre-test to check the product's penetration.
• The support should be impregnated to saturation in one layer or two layers "wet on wet" depending on the porosity.
• Always apply from the bottom up.
• Do not overload the support, remove any excess before drying.
• Protected drying: 24 hours.
• Maximum efficiency obtained after 2 to 3 days.

Application tools:

Apply to low-pressure sprayer, roller or brush.