INFILTRA channel drain with black aluminum grate - AquaDrain - 100/100 PLUS - ECO LINE

INFILTRA drainage channel with black aluminum grate - AquaDrain - 100/100 PLUS - ECO LINE

The 10 cm square aluminium infiltration channel - AquaDrain INFILTRA - 100/100 PLUS - LINE ECO is an extra draining , robust channel consisting of a channel perforated on 1, 2 or 3 sides in synthetic material (PVC) and a designer aluminium grid.

This drainage channel is installed around the house, where there is no car traffic.

Capacity of 10L per linear meter.

It is available in PLUS 1, PLUS 2 or PLUS 3 versions. The PLUS versions have slots on 1, 2 or 3 sides to facilitate and accelerate drainage and infiltration.

This drainage channel is installed around the house, where there is no car traffic.

You can drain water from the gutter, for example, to the sewer or an infiltration system, using a side or bottom outlet. By draining the water to an infiltration system, you also take sustainable action and improve the soil's moisture balance. Pierre et Sol offers Gully infiltration soakaways and other products.

This channel has the option of a side and bottom outlet in addition to the pre-existing slots on the PVC channel (on models PLUS 1, PLUS 2 and PLUS 3). The side outlet is integrated into the end plate, the bottom outlet into a connecting fitting.

For the lower outlet, drill a Ø 75 mm hole in the bottom of the gutter using a hole saw.

Benefits :

• A discreet and elegant drainage solution for the terrace.
• Lightweight gutter element made of synthetic material.
• Easy to install.
• Grille easily removable.
• Available in two colors.
• Only 10 cm wide on the outside.
• Resistance class A 15 (pedestrian only).

Dimensions:

Gutter:

• Length: 1 m
• External width: 10 cm
• Height: 10 cm

Corner element:

• External width: 10 cm
• Height: 10 cm

T-piece:

• External width: 10 cm
• Height: 10 cm

Available colors:

• %C3% A9-of-10-cm-in-aluminium-aquadrain-100100-plus-line-eco.html" target="_blank" rel="noreferrer noopener">Aluminium .
• Black aluminum.

Advice :

• If the flooring is new, we recommend stretching a string to determine the level. When doing this, always place the grid 3 mm below the string.
• If you are placing the gutter in an existing surface, we recommend making a wooden template of the desired height for leveling.
• If the gutter is laid along a vertical wall, the edge of the joining piece must be cut out on that side.

Attention :

Prevent odors by installing a siphon at the sewer connection.

Accessories available separately, see this page .

FAQ - Frequently Asked Questions

1. Can it be installed around a swimming pool?
   Yes, it is ideal for poolside areas thanks to its efficient drainage and resistance to moisture.
2. Is there a risk that the black grille will discolor?
   No, the black aluminum grille is designed to resist UV rays and weathering, greatly limiting any discoloration.
3. Is it suitable for vehicles to pass over it?
   This model is primarily intended for pedestrian and domestic use. For regular vehicle traffic, a model with a reinforced load capacity is recommended.
4. Is the interview complicated?
   No, the grid is easily removable, allowing for quick and easy cleaning to prevent the accumulation of leaves or debris.
5. Can this drainage channel be connected to a conventional drainage system?
   Yes, even though it is designed for infiltration, it can be integrated into an existing drainage network depending on the terrain configuration.