INFILTRA channel with aluminum grate - AquaDrain - 100/100 PLUS - ECO LINE

INFILTRA drainage channel with aluminum grate - AquaDrain - 100/100 PLUS - ECO LINE

The 10 cm square aluminium infiltration channel - AquaDrain - 100/100 PLUS - LINE ECO is an extra draining , robust channel consisting of a channel perforated on 1, 2 or 3 sides in synthetic material (PVC) and a designer aluminium grid.

This drainage channel is installed around the house, where there is no car traffic.

Capacity of 10 liters per linear meter.

It is available in PLUS 1, PLUS 2 or PLUS 3 versions. The PLUS versions have slots on 1, 2 or 3 sides to facilitate and accelerate drainage and infiltration.

This drainage channel is installed around the house, where there is no car traffic.

You can drain water from the gutter, for example, to the sewer or an infiltration system, using a side or bottom outlet. By draining the water to an infiltration system, you also take sustainable action and improve the soil's moisture balance. Pierre et Sol offers Gully infiltration soakaways and other products.

This channel has the option of a side and bottom outlet in addition to the pre-existing slots on the PVC channel (on models PLUS 1, PLUS 2 and PLUS 3). The side outlet is integrated into the end plate, the bottom outlet into a connecting fitting.

For the lower outlet, drill a Ø 75 mm hole in the bottom of the gutter using a hole saw.

Benefits :

• A discreet and elegant drainage solution for the terrace.
• Lightweight gutter element made of synthetic material.
• Easy to install.
• Grille easily removable.
• Available in two colors.
• Only 10 cm wide on the outside.
• Resistance class A 15 (pedestrian only).

Dimensions:

Gutter:

• Length: 1 m
• External width: 10 cm
• Height: 10 cm

Corner element:

• Length: cm
• External width: 10 cm
• Height: 10 cm

T-piece:

• Length: cm / cm
• External width: 10 cm
• Height: 10 cm

Available colors:

• Aluminum.
• %C3% A9-de-10-cm-en-aluminium-noir-aquadrain-100100-plus-line-eco.html" target="_blank" rel="noreferrer noopener">Black Aluminium .

Advice :

• If the flooring is new, we recommend stretching a string to determine the level. When doing this, always place the grid 3 mm below the string.
• If you are placing the gutter in an existing surface, we recommend making a wooden template of the desired height for leveling.
• If the gutter is laid along a vertical wall, the edge of the joining piece must be cut out on that side.

Attention :

Prevent odors by installing a siphon at the sewer connection.

Accessories available separately, see this page .

FAQ - Frequently Asked Questions

1. Is this drainage channel suitable for a garage entrance?
   This model is only suitable for non-vehicular areas. For a garage entrance subject to vehicle traffic, it is recommended to choose a drainage channel with a higher load class.
2. Is the aluminum grille weatherproof?
   Yes, aluminum is resistant to corrosion, climatic variations and UV rays, which guarantees excellent longevity outdoors.
3. Does the gutter require a connection to the sewer?
   No, thanks to the INFILTRA system, the water infiltrates directly into the ground. A connection is not required, provided the soil is sufficiently permeable. Can the drainage channel be cut to the correct length?
   Yes, the channel body can be adjusted to the desired length during installation, following the manufacturer's recommendations.
4. Is it compatible with a slab or natural stone terrace?
   Absolutely, its discreet design and aluminium grid blend perfectly with slabs, paving stones or natural stones, like those offered by Pierre & Sol.
5. Is the interview complicated?
   No, occasional cleaning of the grate and the body of the channel is sufficient to ensure optimal flow.