Akepox 5000 - Fluid glue - Akemi

Akepox 5000 - Fluid glue - Akemi

Fluid 2-component glue for bonding visible joints inside and outside , for marquetry work, for repairing and filling cracks , for reinforcement work.
Very good grip on wet stones.

Features :

• little yellowing
• Easily colorable
• Weather resistant
• Mix ratio 2:1
• Very weak own color
• Very low tendency to yellow
• Very little shrinkage during hardening and minimal tension of the adhesive layer
• Particularly weather-resistant bonding
• Easily tintable with AKEPOX dyes or concentrates
• No deformation of the glue layer
• Good resistance to aging
• Very good resistance to alkalis, and therefore recommended for bonding to concrete
• Recommended on gas-tight materials, due to the absence of solvent
• Very good laminating resin for making sandwich parts
• Good grip on slightly damp stones
• Recommended for materials sensitive to solvents, such as expanded polystyrene, ABS

Use :

1. Thoroughly clean the surfaces to be bonded and roughen them.
2. Mix 2 equivalents in weight or volume of adhesive with 1 equivalent in weight or volume of hardener until obtaining a homogeneous color.
3. The product can be colored using AKEPOX dyes or concentrates (max. 5%).
4. The mixture can be used for about 20 to 30 minutes (20°C).
   The bonded parts are transportable after 6 to 8 hours (20°C), loadable and machinable after 12 to 16 hours (20°C).
   Maximum strength after 7 days (20°C).
5. Tools can be cleaned with AKEMI Thinner Nitro.
6. Heat accelerates and cold retards the hardening reaction.

Conditioning :

1.5kg and 15kg