Wall Protect Salt Stop - Prevents salt deposits on your wall - Aquaplan

Wall Protect Salt Stop - Prevents salt deposits on your wall - Aquaplan

Wall Protect Salt Stop is a salt neutralizer that ensures the crystallization of salt inside the stones and therefore prevents it from escaping from the support.

These salts therefore do not affect the appearance of the stone .

It also promotes the adhesion of any (waterproof) coating.

Benefits :

• Prevents the formation of salt
• Ideal primer for wall products
• Reduces moisture transport

Application :

Can be used on porous interior and exterior walls such as concrete, brick and sand-lime brick.

Useful information:

• Store in a cool (max 25°C) and dark place.
• Do not apply at temperatures below 0°C.
• Shelf life: minimum 12 months. Opened packages have a limited shelf life.
• Clean your tools with water.

Yield :

Approximately 0.1 - 0.25 kg / m².

Prepare the support:

• The surface must be free of grease and loose material. Brush off any salt efflorescence beforehand.
• Combat green deposits, lichens and algae with the product %C3% A9p %C3% B4ts-verts/5114-stop-depots-verts-elimine-les-depots-verts-et-lichens-aquaplan.html" target="_blank" rel="noreferrer noopener">Stop Green Deposits .

Instructions for use:

1. Apply with a brush or sprayer as appropriate, in one or more coats.
2. During the application and drying of the product, the temperature must not fall below 0°C.
3. After 4 hours of drying, a new layer of cement can be applied. The use of acrylic or silicate paints is possible after a minimum of 24 hours.
4. During the drying process, some salts may still rise to the surface; you can simply remove them with a brush.

Features :

• Color: Transparent
• Packaging: 1 and 5L
• Drying time: Approximately 4 to 24 hours
• Layers: n/a
• Repaintable: Yes

FAQ - Frequently Asked Questions

1. Does Salt Stop eliminate saltpeter that is already present?
   No, it prevents the reappearance of saltpeter but does not remove existing deposits. These must be brushed and cleaned before treatment.
2. Can I paint over the product after application?
   Yes, once dry, Salt Stop is compatible with mineral paints and coatings. Wait at least 24 hours before recoating.
3. Does the product completely block moisture?
   No, it's a breathable product, meaning it allows water vapor to pass through to prevent damage to the surface. It doesn't replace a heavy-duty water repellent or a treatment against leaks.
4. Can it be applied indoors?
   Yes, it is suitable for interior walls (cellars, garages, damp rooms) and exterior walls.
5. How long does the protection last?
   Under normal conditions, the protection lasts for several years. Reapplication may be necessary in case of renovation or heavy exposure.
6. What is the yield of the product?
   The average yield is 4 to 6 m²/litre, depending on the porosity of the substrate.
7. Does the product change the color of the wall?
   No, it becomes completely invisible after drying.
8. Can it be used on bluestone or non-porous materials?
   No, the product is designed for porous surfaces only. It will have no effect on bluestone or smooth surfaces.