ECOSTAR Unicolor Doormat

ECOSTAR Unicolor Doormat

With or Without Doormat Frame.

__ETS_EMBED_Mg==__

Personalize the ECOSTAR doormat by choosing from 66 shades of color to match your doormat to the place where you want to put it.

• Maximum print size 200 cm x 500 cm. (Larger designs may be possible)
• Incredible stain resistance, no discoloration, easy to clean.
• The yarn contains 100% recycled PET.
• Produced quickly, within 24 HOURS after validation of your project for standard dimensions.

Please provide the external dimensions of the doormat OR the frame. We will calculate the rest.

PAY ATTENTION to the direction of travel.

PRESENTATION

Recycled PET (polyethylene terephthalate) fiber is durable and quick-drying. It allows for the creation of a stylish and versatile entrance mat. Its customization options offer attractive looks for high-quality products, thanks to the unique composition of technical textiles, backing, and a multitude of possibilities.

This doormat is suitable for any interior, home, lobby, shop, store, administration building, school, or office, thanks to its high resistance to heavy foot traffic, up to 2,500 times per day. 5-year guarantee, 250 washes.

The mat is rollable, flexible, and may or may not have underlayers adapted to the thickness.

Technical details and tests are specified below at the bottom of the page.

KEY POINTS: We offer a wide choice of colors for your projects, ramps, doormat frames, as well as integrated scrapers or brushes, a harder surface, custom stainless steel marking, a design choice for outdoor use,... Available upon request or see our other pages.

EDGE THICKNESS AND FINISH:

• ± 8 mm with a 2 cm rubber edge (doormat to be placed on the floor)
• ± 10 mm without edge (recessed doormat)

The 10 mm doormat (without border) can be placed in a pit and surrounded by a doormat frame.

The 2cm wide rubber edge has a thickness of 2.5mm.

DOORMAT UNDERLAYER:

The doormat is available in 2 different underlayers.

1. Smooth sole: A smooth rubber sole.
2. Claw sole: A sole raised by rubber "studs" ideal for dirty places, slopes or any other place where grip is not optimal.

DESIGN & COLOR CHOICES

CHOICE OF DOORMAT FRAME

When ordering a custom-made frame, you must specify the frame's external dimensions . Our technical department will then calculate the usable dimensions of the doormat.

To compensate for the thickness of the doormat frame, it may be necessary to level the bottom of the doormat (using a leveling compound such as Egaline) or add a rubber underlay of a few millimeters; see "RUB - Rubber underlay for entrance doormats" on this page.

PROMA-JAN - Aluminum - Natural - Height 16 mm

Frames for entrance mats in anodized aluminum color, natural color .

Profiles of 30 x 16 x 3 mm, with a visible top edge of 7 mm.

Profile height: 16 mm - Doormat recess height: 12 mm.

VER-ALU - Aluminum - Natural - Height 16 mm or 21 mm

Frames for entrance mats in aluminium colour, natural colour.

Profiles of 21 x 16 mm, 3 mm thick. Visible edge of 6 mm.

Profile height: 16 or 21 - Doormat recess height: 10 or 15.

PROMA-AN - Aluminum - Natural - Height 26 mm

Frames for entrance mats in anodized aluminum color, natural color.

Profiles of 30 x 26 mm, 3 mm thick. Visible edge of 7 mm.

Profile height: 26 mm - Doormat recess height: 22 mm.

PROMA-AR - Aluminum - Stainless steel color - Height 26 mm

Frames for entrance doormats made of aluminum in stainless steel color.

Profiles of 30/26/3 mm, with a visible upper edge of 7 mm and fixings.

Profile height: 26 mm - Doormat recess height: 22 mm.

VER-ALU - Aluminum - Natural - Height 26 mm or 31 mm

Frames for entrance mats in aluminium colour, natural colour.

Profiles of 31 x 26 mm, 3 mm thick. Visible edge of 6 mm.

Profile height: 26 or 31 mm - Doormat recess height: 20 or 25 mm.

PROMA-AZ - Aluminum - Anthracite Grey - Height 26 mm

Frames for entrance doormats in aluminum, in anthracite grey.

Profiles of 30/26/3 mm, with a visible upper edge of 7 mm and fixings.

Profile height: 26 mm - Doormat recess height: 22 mm.

VER-BLACK - Black lacquered aluminum - Height 26 or 31 mm

Frames for entrance doormats in black lacquered aluminum.

Profiles of 31/26 or 26/31 mm, with a visible upper edge of 6 mm.

Profile height: 26 mm or 31 mm - Doormat recess height: 20 mm or 25 mm.

Please note, the frame thickness is 6 mm, you may need to use an underlay to compensate for the thickness.

PROMA-MS - Brass - Natural - Height 26 mm

Natural brass entrance mat frames.

Profiles of 30/26/3 mm, with a visible upper edge of 7 mm.

Profile height: 26 mm - Doormat recess height: 22 mm.

VER-LAI - Brass - Height 26 or 31 mm

Aluminum entry doormat frames in brass color.

Profiles of 31/26 or 26/31 mm, with a visible upper edge of 6 mm.

Profile height: 26 mm or 31 mm - Doormat recess height: 20 mm or 25 mm.

Please note, the frame thickness is 6 mm, you may need to use an underlay to compensate for the thickness.

TEXTILE

• FIL: Continuous filament PET fiber with 100% recycled content.
• THREAD WEIGHT: 900 gr/m² .
• FIBER DEE LENGTH: 11 mm.
• STATIC CONTROL: ISO 6356 (2012) Determination of propensity for static electricity - walk test: -0.3 kVolts. Meets IBM testing requirements.
• TOTAL WEIGHT: 2.90 kg/m².
• PRIMARY SUPPORT: 130 g/m² spun polyester non-woven fabric.
• RUBBER SUPPORT: 100% Nitrile EXS™ rubber for maximum oil resistance, weight reduction, and flexibility. Compression molded with reinforced edges on all four sides.
• BORDER THICKNESS: 2.5 mm
• BODY THICKNESS: 1.5 mm
• WIDTH OF THE PERIFEROUS BAND: 2 cm
• TOLERANCE: +/- 2%
• FIRE RESISTANCE: Complies with BS 4790 (1987) for the determination of the flammability of textile floor coverings: low radius of ignition effects.

The color of the doormat is dyed on white fibers; specialized and durable dyes are sprayed directly onto the fibers (like current color printers).

During the drying process, the color fuses with the fibers for maximum durability.

The mat or doormat is then vulcanized onto the rubber to permanently fix the fibers.

SUPPORT & BACK

Rubber backing of 1.5 mm (doormat of ± 8 mm) or 3 mm (doormat of ± 10 mm)

The printed mat can also be glued to the underlay or attached using Velcro or double-sided adhesive... However, this reduces the options for care and maintenance.

ECOLOGICAL FOOTPRINT

The manufacturer is committed to reducing the environmental footprint of its product production.

For this reason, the products are manufactured using 100% reusable energy and local materials.

ECOSTAR doormats are produced using PET yarns, 100% of which come from recycled material.

CLEANING INSTRUCTIONS

ECOSTAR rugs can be cleaned in different ways.

• They can be used for laundry/industrial cleaning (see laundry instructions)
• Machine washable at low temperature.
• Vacuumed regularly (daily in high-traffic areas; weekly in low-traffic applications)
• Clean with an extractor or hose down as needed to remove heavy dirt. Hang to dry.

Carpets must always be dry before being put back into service.

LAUNDRY WASHING INSTRUCTIONS

• Rinse for 2-3 minutes at a medium water level with a maximum temperature of 49°C.
• Rinse (optional), 2-3 min. on a medium water level with a maximum temperature of 49°C
• Pause, 2-3 min. on a high water level with a maximum temperature of 49 °C
• Rinse for 2 minutes under high water pressure with a cold temperature.
• Rinse for 2 minutes under high water pressure with a cold temperature.
• Extract at low speed, 1-2 min.
• Shake with the rotating drum, 1 min.
• Extract, on a maximum of 250G, 3-5 min.
• Dry (optional), 5-10 min. with a maximum basket temperature of 82°C
• Cooling, 5 min.

Additional recommendations:

• For heavily soiled carpets, increase the temperature up to a maximum of 60°C.
• The breakage should not exceed a pH of 9.5; use low pH non-ionic detergents.
• Do not over-dry carpets; the dryer basket temperature should not exceed 82°C.
• If the carpets are not dry, the final rinse temperature can be increased to 49°C. This will reduce moisture retention after extraction.
• Lay the rugs flat after removing them from the washing machine; allow the rugs to cool before rolling them up.

FAQ - Frequently Asked Questions

1. Is the ECOSTAR doormat non-slip?
   Yes, its underlay is designed to ensure good stability on most smooth floors, thus reducing the risk of slipping.
2. Can it be used outdoors?
   It is ideal for indoor or sheltered outdoor use. For direct exposure to the elements, a specific outdoor doormat is recommended.
3. Is it really environmentally friendly?
   Yes, the Unicolor ECOSTAR doormat is made from recycled fibers, contributing to waste reduction while ensuring excellent resistance.
4. Is it suitable for high-traffic areas?
   Absolutely, its dense structure makes it perfectly suited to high-traffic areas such as building entrances or professional premises.
5. How to extend its lifespan?
   Regular maintenance by vacuuming and occasional cleaning are sufficient to maintain its performance and original appearance.