Polish'Guard - Protective wax - Guard Industrie

Polish'Guard - Protective wax - Guard Industrie

Non-slippery wear layer that is resistant to abrasion and scratches.
Polish'Guard is an acrylic emulsion containing metal ions that provide a high-strength wear layer. Polish'Guard is particularly designed to treat a wide variety of media as well as support protected by the ProtectGuard range of protection products.

Diluted at a rate of 1 volume for 9 volumes of water, Polish'Guard can also be used to provide regular maintenance.

Advantage:

• Makes a non-slippery wear layer
• Resists abrasion and scratches
• Colorless
• Makes it look shiny
• Makes maintenance easier

Use:

• All types of materials: porous mineral surfaces (concrete, terracotta, cement), plastic, linoleum, wood, ...
• Soil
• New or old
• Interior

Preparing support:

• Apply the product to a clean, dusted, grease-free and dry surface.

Application:

• Shake the packaging well before use and do a pre-test.
• Use the product in its purest form: do not dilute.
• For optimal results, apply 2 or 3 thin layers of Polish'Guard without overloading the support.
• Wait about 30 minutes for drying between the two layers.
• Apply the second layer, taking care to cross it with the first layer.
• To accentuate the shine, it is possible to pass a third layer after 30 minutes of drying.
• To enhance shine and strength, polish'Guard with a single brush or high speed (400 t/mn) with a white disc.
• Drying before going back into circulation: 6 hours.

Application tools:

Apply with a flat broom or applicator sleeve.

Consumption:

• Raw concrete: 6 to 10 m2/L
• Protected concrete: 15 to 20 m2/L
• Thermoplastic surface: 20 to 25 m2/L
• Maintenance: 20 to 40 sqm/L

Packaging:

5L can.