Renov'asphalt - Renovation for asphalt roads - Aquaplan

Renov'asphalt - Renovation for asphalt roads - Aquaplan

A universal and flexible bitumen emulsion , intended for the renovation of asphalted roads , paths and walkways .

Bitumen emulsion regenerates worn asphalt pavement and fills holes and cracks , thus preventing damage to the asphalt from water and frost.
Thanks to the unique filler materials, the new asphalt layer will also be anti-slip.

⚠️ This product is a universal and elastic, solvent-free bituminous emulsion that is sensitive to certain storage conditions. The main risk is breakage of the bituminous emulsion (phase separation), which renders the product unusable! Therefore, it is important to apply the product relatively soon after receiving your order and not to store it for several weeks, months, or years to avoid this risk.

Benefits :

• Regenerates worn asphalt and limits water/freeze damage.
• Non-slip finish thanks to specific fillers.
• Simple application with a brush/squeegee (1 coat).
• Ideal for driveways, garage entrances, paths, private parking lots.

Application :

On bituminous/asphalt surfaces (driveways, paths, access roads, parking lots) . Not suitable for non-bituminous surfaces (concrete, stone, tiles). (Aquaplan classifies it as a cold asphalt and describes its use as “roads/asphalt”).

Instructions for use:

1. Preparation : Dust/degrease, pressure wash + moss removal if necessary; rinse to remove all residue. The surface may be slightly damp.
2. Filling : Fill holes/irregularities > 5 mm with Repar'Asphalt; wait 1 month before
3. Conditions : Do not apply in rain, fog, or under 24-hour risk of frost; Temperature 5–35 °C.
4. Mix mechanically until a homogeneous liquid is obtained.
5. Apply one coat with a brush/squeegee at approximately 1 kg/m². Allow to dry for 24 hours (at 20°C) before use. (Pro tip: pay particular attention to micro-cracked areas; thorough cleaning is essential for both appearance and durability.)

Consumption & efficiency:

• Approximate yield: ≈ 1 kg/m² → ≈ 20 m² per 20 kg bucket (1 coat).
• Example 100 m² (standard driveway, 1 layer): 5 buckets (100 / 20).
• Allow a margin of +10 to +20% if the asphalt is very porous/cracked (higher absorption observed in practice).

Maintenance & best practices:

• Clean twice a year (broom + high-pressure cleaner) to limit soiling and prolong life.
• Remove oil stains before any renovation: they impair adhesion.
• Avoid over-sealing : too many layers can weaken the asphalt.
• Treat micro-cracks early to prevent potholes (freeze/thaw effect).
• Preparation = key : inspection, deep cleaning, local filling, then application of the coating.
• Follow the Aquaplan product instructions (1 coat ≈ 1 kg/m²; dry before putting back into service).

Pro tip: a clean and grease-free surface significantly improves aesthetics and durability.

Packaging:

• 20 kg.
• Black.

__ETS_EMBED_Mg==__

FAQ - Frequently Asked Questions

1. On what types of surfaces can I apply Renov'asphalt?
   Renov'asphalt is designed for all asphalt or bitumen surfaces: driveways, parking lots, garage entrances, sidewalks, courtyards, private roads and slightly deteriorated asphalted areas.
2. Does the product repair cracks?
   It masks and reduces micro-cracks. For deep or very wide cracks, it is recommended to use a repair product before application.
3. What is the average consumption?
   Depending on the porosity of the asphalt, you can generally expect 4 to 6 m² per liter. Very old surfaces may require more product.
4. How long does it take for the product to dry?
   Drying time varies between 2 and 6 hours, depending on temperature and humidity. Light traffic can resume once the film is completely dry.
5. Can the product be applied with a roller?
   Yes, Renov'asphalt can be applied with a roller, brush, or sprayer. Roller application is recommended for large areas.
6. Does Renov'asphalt change the color of my driveway?
   Yes, it revives the color and restores a uniform deep black, like new asphalt.
7. How long does the protection last?
   Durability depends on usage, climate and traffic, but protection is generally effective for several years before reapplication is required.
8. Is the product resistant to frost and rain?
   Yes. Once dry, Renov'asphalt offers excellent resistance to water, frost, UV rays and weathering.
9. Can Renov'asphalt be applied in cold weather?
   Application is recommended only when temperatures are above 10°C, on a dry surface.
10. Is it suitable for high-traffic areas?
    Yes, but for areas with very high traffic (heavy goods vehicles, continuous industrial traffic), more robust protection may be necessary. For domestic and semi-professional use, Renov'asphalt offers excellent durability.