KF Cement Remover - Ceramic Cement Remover - Lithofin

KF Cement Remover - Ceramic Cement Remover - Lithofin

This product is an acid cleaner specially designed for application on coatings such as ceramics , terracotta and porcelain stoneware .

It easily removes inorganic dirt such as cement haze , mortar residue, rust , limescale deposits and all other layers of hardened dirt.

This product contains a mixture of special acids and auxiliary agents.

Its action is powerful and it rinses off without leaving any residue.

Its odor is particularly weak and it does not give off corrosive vapours.

Technical specifications :

• Density: approx. 1.09g/cm3.
• pH: < 1 (concentrate).
• Appearance: transparent, orangeish.
• Pleasant odor.
• Solubility in water: very good.

Application domain :

Thanks to its light odor, Lithofin KF Cement Remover is particularly suitable for interior use for all ceramic surfaces which must be cleaned after grouting.

It allows the coatings to regain their natural color.

Manual :

1. Depending on the thickness of the mineral film, dilute Lithofin KF Cement Remover from 1:4 to 1:15 with water.
2. Apply the solution to the previously wet surface and spread with a brush or similar utensil.
3. After a few minutes, brush, remove with a wet vacuum cleaner or a cloth and wash with plenty of water until the complete elimination of dirty residues.
4. For stubborn areas use the pure product or repeat the procedure.

Caution : Lithofin KF Enlève Ciment is not suitable for surfaces sensitive to acids: enamel, zinc, anodized surfaces, polished marble, certain decorative tiles and other similar surfaces. Protect neighboring surfaces, wipe up spills immediately. If in doubt, test on an inconspicuous surface.

Tip : For extremely stubborn dirt we recommend the use of Lithofin Muro - for exterior use only.

Yield :

• Approximately 15 to 30 m²/L depending on clogging.