Erdifluid - Water-reducing plasticizer for concrete and mortar - Zep Industries

Erdifluid - Water-reducing plasticizer for concrete and mortar - Zep Industries

Water-reducing plasticizer for concrete and mortar is used with the preparation of cement and concrete, grease for facades , foundations , for jointing, sealing and screeds.
Improves implementation.
Treated concrete is more compact.

Properties :

• Better homogeneity between the paste and the granules.
• Reduces shrinkage cracks.
• Neutral product; contains no acid, ammonia, alkali, solvent, hydrocarbon, abrasive, etc.

Instructions for use:

1. Add 50 cc to 100 cc per bag of cement to the cement mixer during mixing.
2. Makes mortars and concretes more fluid, more malleable, more oily to the touch without adding water, therefore without loss of strength and without excessive cracking.
3. Slightly delays setting time.
4. Avoids having to remix and thereby breaking the first hold, so no drop in resistance.
5. Prevents water from accumulating above the mortar in the basin, thus saving time.

Packaging:

5 L and 20 L.

FAQ - Frequently Asked Questions

1. What exactly is Erdifluid used for?
   Erdifluid is used to make concrete or mortar more fluid without adding extra water, which improves implementation while maintaining, or even increasing, final strengths.
2. Can Erdifluid be used with all types of cement?
   Yes, Erdifluid is compatible with most common cements (CEM I, CEM II, etc.). However, it is recommended to carry out a preliminary test for specific formulations.
3. Does Erdifluid change the setting time of concrete?
   No, when used at the recommended dosage, Erdifluid does not significantly alter the time it takes to take the medication. However, an overdose may have a slight delaying effect.
4. Can it be used for screeds or laying mortars?
   Yes, Erdifluid is perfectly suited to traditional screeds and masonry mortars, where it improves workability and finish.
5. Does Erdifluid increase the strength of concrete?
   Indirectly yes, by reducing the mixing water, the water/cement ratio decreases, resulting in better mechanical resistance after hardening.
6. Is it compatible with other adjuvants?
   Erdifluid is generally compatible with other adjuvants, but it is advisable not to multiply additives without prior testing in order to avoid undesirable interactions.
7. Is the product dangerous?
   Erdifluid is a professional product. It is recommended to wear gloves and safety glasses when handling it and to consult the safety data sheet (SDS).