Acryrub SWS - Silanized acrylic sealant EC 1 PLUS - Soudal

Acryrub SWS - Silanized acrylic sealant EC 1 PLUS - Soudal

Acryrub SWS is a high-quality, one-component, elastic sealant, conforming to DIN EN ISO 11600 F12.5E, based on acrylic dispersions. Acryrub SWS is suitable for the Soudal Window System.
EC 1 PLUS label: very low VOC emissions .

Features :

• Permanent elasticity after polymerization.
• EC 1 PLUS label: very low VOC emissions .
• Very malleable.
• Color is permanent and waterproof after hardening.
• Recoatable after hardening.
• Very good adhesion on many porous materials, rigid PVC and aluminum.
• IFT certified.
• RAL certified.

Applications:

• Airtight joints between the plaster and the woodwork.
• Watertight seals inside at window connections with up to 25% movement.
• Connection joints in the construction sector.
• Connection joints at window sills, between baseboard and wall, between masonry, etc.

Packaging

• 310 ml cartridge.
• 600 ml pouch.

FAQ - Frequently Asked Questions

1. Is Acryrub SWS compatible with other sealants?
   It is compatible with most acrylic sealants and Soudal SWS systems. However, do not apply over silicone, as this limits adhesion.
2. Can it be used outdoors?
   Yes, but its main use is indoors. Outdoors, it must be protected with a suitable paint.
3. Can the sealant be painted?
   Yes, Acryrub SWS is perfectly recoatable with water-based paints (latex, acrylic).
4. What is the complete drying time?
   Drying time depends on the thickness of the joint. Surface dry in 30 to 60 minutes. Fully cured in 24 to 48 hours.
5. Is Acryrub SWS suitable for moving joints?
   Yes, thanks to silanized technology, it remains elastic and follows the moderate movements of materials.
6. Can it be used to seal cracks?
   Yes, it is very effective for cracks in walls and ceilings, thanks to its durable elasticity.
7. Is a primary school required?
   No, it adheres without a primer to porous surfaces. For smooth surfaces, a preliminary test is recommended.
8. Is it dangerous to health?
   No, it is a very low emission sealant (EC1 PLUS), solvent-free, and very low odor.
9. How do I clean up the excess product?
   Before drying, soapy water, after drying, mechanically (light scraping).