Restore Aero - Protective Film - Zep Industries

Restore Aero - Protective Film - Zep Industries

Acrylic lacquer -based protective film that works as a transparent protective film for all kinds of surfaces against mild acids, grease stains, fingerprints, alkali, dust, etc.
The plans, maps, important documents, etc. remain intact and perfectly legible.
Protects against dirty fingerprints and makes it waterproof.

Properties :

• With Zep Restore, plans, maps, important documents, etc. remain intact and perfectly legible.
  Protects against dirty fingerprints and makes it waterproof.
• Motors, wires and batteries treated with 'Zep Restore' are protected against moisture and rust, making motor maintenance easier.
• Zep Restore does not yellow or discolor over time; the original color of the treated surface is also not altered.
• Good quality paneling is expensive: protect this investment simply, with a coat of Zep Restore the original shine will remain intact and stains, streaks and scratches can be removed with a damp cloth.
• A single coat of Zep Restore provides 6 months of protection. On metal, the product acts against corrosion.
• By using Zep Restore, surfaces are completely protected against the effects of moisture, whether from condensation or rain.

Applications:

Lamination of plans, photocopies, documents, drawings.
Protects printed circuit boards and electrical connections.
Against corrosion of metals exposed to weathering, battery terminals, rubbers exposed to water and oil splashes.

Instructions for use:

1. Clean the surface to remove any impurities.
2. Shake before use.
3. Spray from approximately 30 cm away from the surface to be treated.
4. Apply several successive coats to obtain maximum protection.
5. Two thin coats are recommended rather than one thick coat.
6. Allow 10 minutes of drying time between each coat.
7. After spraying, invert the aerosol and purge to avoid clogging the valve.

Packaging:

570 ml - Aerosol.

FAQ - Frequently Asked Questions

1. Is the film truly transparent?
   Yes, Restore Aero forms a clear and discreet film, almost invisible.
2. Can it be used on a car body?
   Yes, the product is perfectly suited for painted surfaces, including bodywork, hoods or bumpers.
3. Is the film water-resistant?
   Yes, it is resistant to moisture, rain and water splashes, making it ideal for temporary outdoor storage.
4. How do I remove the protective film?
   Simply peel it off gently or rub it lightly. No solvent is needed.
5. Can the product be applied in multiple layers?
   Yes, multiple layers can be applied to increase the film thickness and enhance protection.
6. Does the product leave any residue after removal?
   No, Restore Aero is designed to leave no residue.
7. What is the drying time?
   Generally, it dries in a few minutes, depending on the temperature and the thickness applied.
8. Is it compatible with plastic surfaces?
   Yes, it can be used on many plastics, ABS, PVC, polycarbonate, etc.