ProtectGuard EM Premium - Intense wet look water repellent - Guard Industrie
ProtectGuard EM protects all porous building materials by giving treated substrates a "wet look" finish that enhances the original colour.
Volume discounts
Quantity | You Save | Unit price |
---|---|---|
3 | 5 % | £71.22 |
5 | 10 % | £67.47 |
10 | 15 % | £63.72 |
ProtectGuard EM Premium - Intense wet look water repellent - Guard Industrie
ProtectGuard EM Premium protects all porous building materials by giving treated substrates a “wet look” finish that enhances the original color.
It prevents water penetration, stains and all types of dirt from penetrating a treated mineral surface.
A surface treated with ProtectGuard EM Premium will be easier to maintain.
Advantages
- Protection against water, oil and stains
- Intense wet effect that enhances the color
- Long-lasting hold
- Usable on a wide variety of media
- Does not form a film, lets the support breathe
- High yield
- Delays aging and facilitates maintenance
- Water based
- Low VOC and solvent free
Use
- Porous and low-porous materials: natural stones (travertine, Bavarian stone, blue stone, marble, etc.) or reconstituted stones, concrete, terracotta, etc.
- Floors and facades
- New or old
- Inside and outside
- Recommended for terraces, driveways, pedestrian areas, swimming pool decks, facades, stairs, etc.
Implementation
Preparation of the support
- Apply the product to a clean, dust-free, degreased and dry surface (moisture content less than 5% by mass).
- Rinse thoroughly until the surface is free of all traces of the cleaner and allow to dry for 24/48 hours.
Application
- Shake the packaging well before use and use the product pure: do not dilute or mix with another product.
- Carry out a preliminary test on a small surface before treating the entire surface in order to validate the effect.
Apply in a thin layer, taking care to draw out the product (it is not necessary to soak the application tool too much, take very little product). - Do not overload the support, all the product must penetrate the surface.
- After 3 to 5 minutes, carefully wipe and polish the treated material with an absorbent, lint-free cloth.
Change cloth regularly to wipe the product thoroughly. The surface should become matte again. - On large surfaces, work in zones to avoid stepping on the product when wiping.
- On certain materials and depending on their heterogeneities, it may be necessary to apply an additional coat the next day or after drying to homogenize the wet effect.
- Protection of treated surfaces from rain and pedestrian traffic: 24 hours.
- Optimal effectiveness of protection obtained after 3 days.
Application tool
Application: short nap roller, brush for acrylic varnish.
For smooth surfaces, you can also use a microfiber flat broom.
Wiping: microfiber cloth or lint-free absorbent.
Consumption
Consumption depends on the porosity of the material.
The values below are given for information purposes only:
- Porous materials: 10 to 20 m2 / kg.
- Low porous materials: 20 to 35 m2 / kg
Conditioning
2 kg and 5 kg canister.
Data sheet
- Signal word
- WARNING
- Hazard statements
- H226 – Flammable liquid and vapour
H319 – Causes serious eye irritation. - Hazard pictogram
-
GHS02 - FlammableGHS07 - Harmful
Specific References
- EAN13
- 3461511001592
Après 10 ans de recherche pour avoir mes pierres bleues plus foncées en permanence (effet mouillé), avec ce produit je suis très satisfait,cela fonctionne très bien, d ailleurs je viens d en recommander,et bravo pour la rapidité d envois Enfin un produit qui fonctionne !!!