73A MS Parquet Adhesive - Hybrid Polymer Adhesive for Wood Flooring - Soudal

73A MS Parquet Adhesive - Hybrid Polymer Adhesive for Wood Flooring - Soudal

MS-Polymer parquet adhesive based on SMX hybrid polymer, elastic. Suitable for installing large-format solid wood flooring and underlayment. Consumption: 1000 to 1200g/m².

Features :

• Elastic Label EC-1R PLUS: very low emission.
• Ready to use, single component.
• Solvent-free.
• Does not contain water.
• Isocyanate-free. Easy to apply.
• High final adhesion strength (according to EN14293).
• Suitable for underfloor heating. Does not stain hands.

Applications:

• Suitable for use on porous and non-porous substrates such as mosaic, anhydrite, concrete, screeds, wood, particleboard and OSB (large particle board), compatible with underfloor heating and cooling.
• Consumption: 1000 to 1200g/m².

Instructions for use:

1. Allow the glue to acclimatize before use.
2. Apply the glue to the surface using a notched spatula, Soudal Parquet Spatula No. 11.
3. Limit the treated area to what can be covered with parquet flooring within 30 minutes.
4. Lay the parquet flooring by sliding it into the glue and tapping it with a rubber mallet or hammer.
5. Ensure good contact between the glue and the blades (min. 80% coverage).
6. Possibly add weight to the parquet flooring during polymerization.
7. Proceed with the sanding no sooner than after a minimum of 24 hours.
8. To remove fresh glue stains, use Soudal Glue Cleaner or Soudal Swipex.

Packaging:

• Buckets of 7 and 15 kg.

FAQ - Frequently Asked Questions

1. Is this glue compatible with underfloor heating?
   Yes, the 73A MS Parquet Glue is perfectly compatible with underfloor heating systems, thanks to its permanent elasticity which absorbs thermal variations.
2. Can it be used on old tiles?
   Yes, provided that the tiles are well adhered, degreased and properly prepared.
3. Is it suitable for solid wood floors?
   Yes, this glue is particularly recommended for solid wood floors, including large ones.
4. Does it contain solvents or harmful substances?
   No, it is solvent-free, water-free and isocyanate-free, making it safer for the user and the material.
5. Is it suitable for exotic woods?
   Yes, but as with any parquet adhesive, it is advisable to do a preliminary test, as some exotic woods are very dense or oily.
6. Can you walk on the parquet floor quickly?
   Light circulation is possible after approximately 24 hours, but it is recommended to wait 48 hours before any full charging.
7. Does glue reduce footstep noise?
   Yes, thanks to its elasticity, it helps to reduce impact noise and improves acoustic comfort.