EconoDry HEAVY Doormat - Custom Made

HEAVY = MORE EFFICIENT

Please provide the external dimensions of the doormat OR the frame, we will calculate the correct measurements for everything.

CAUTION: The profiles must be installed perpendicular to the direction of travel.

If necessary, depending on the ordered depth and the width of the aluminum profiles plus gaps (approximately 35 mm), we will adjust the gap width (3, 4, 5, or 6 mm) or add aluminum elements to achieve the desired depth.

Description and composition

Economical, durable and more efficient custom-made roll-up entrance mat to be recessed into a frame, composed of an aluminum support profile.

• The underside of the aluminum profile is entirely covered with sound-absorbing cellular rubber to prevent the doormat from slapping against the floor.
• This roll-up doormat is made of aluminium profiles containing polyamide (nylon) felt inserts.
• Black PVC spacers of 4 mm and a 2 mm stainless steel cable connect the profiles.
• The open structure ensures better absorption of moisture and dirt and allows for easy removal of dirt after rolling up the doormat.

This doormat is suitable for moderate to medium frequency use.

• Traffic: 1000 passages/day
• Locations: Office, shop, home
• Warranty: 2 years

The mat is custom-made and produced in a single piece, depending on the dimensions in the direction of travel. Depending on the weight, the doormat can be divided without affecting its appearance. If the width of the doormat exceeds 3 meters, the sections are laid side by side, separated by an inverted T-shaped connector.

The desired function and decor determine the design and division of the doormat.

The Economat Light has a height of 18 or 22 mm (23 mm with brush) and is placed in a smooth pit with a depth of 20 or 25 mm respectively.

The corresponding recessed frames are made of anodized aluminum or brass.

In case the doormat needs to be placed directly on the floor, an anodized aluminum anti-scuff ramp is available.

Given the materials used, we advise against installing underfloor heating below the pit.

CHOICE OF DOORMAT COLOUR AND FABRIC

Polyamide (Nylon) Color: Grey

Polyamide (Nylon) Brown

Polyamide (Nylon) Blue

CHOICE OF BRUSHES OR SCRAPER

For greater efficiency in retaining large dirt, mud, gravel and other residues, including on profiled soles with the aluminum scraper.

• Aluminum scraper blade, thickness xx mm
• Alternating colored nylon brush embedded in PVC strips

Scrappe Aluminum Scraper Blade

Grey nylon brush 101

Anthracite nylon brush 741

Black nylon brush 601

BROWN nylon brush 739

COCO 644 nylon brush

Green nylon brush 309

BLUE nylon brush 424

RED nylon brush 129

CHOICE OF DOORMAT FRAME

When ordering a custom-made frame, please provide the frame's external dimensions. Our technical department will then calculate the usable dimensions of the doormat.

To compensate for the thickness of the doormat frame, it may be necessary to level the bottom of the doormat (using a leveling compound such as Egaline) or add a rubber underlay of a few millimeters; see "RUB - Rubber underlay for entrance doormats" on this page.

VER-ALU - Aluminum - Natural - Height 16 mm or 21 mm

Frames for entrance mats in aluminium colour, natural colour.

Profiles of 21 x 16 mm, 3 mm thick. Visible edge of 6 mm.

Profile height: 16 or 21 - Doormat recess height: 10 or 15.

PROMA-AN - Aluminum - Natural - Height 26 mm

Frames for entrance mats in anodized aluminum color, natural color.

Profiles of 30 x 26 mm, 3 mm thick. Visible edge of 7 mm.

Profile height: 26 mm - Doormat recess height: 22 mm.

PROMA-AR - Aluminum - Stainless steel color - Height 26 mm

Frames for entrance doormats made of aluminum in stainless steel color.

Profiles of 30/26/3 mm, with a visible upper edge of 7 mm and fixings.

Profile height: 26 mm - Doormat recess height: 22 mm.

VER-ALU - Aluminum - Natural - Height 26 mm or 31 mm

Frames for entrance mats in aluminium colour, natural colour.

Profiles of 31 x 26 mm, 3 mm thick. Visible edge of 6 mm.

Profile height: 26 or 31 mm - Doormat recess height: 20 or 25 mm.

PROMA-AZ - Aluminum - Anthracite Grey - Height 26 mm

Frames for entrance doormats in aluminum, in anthracite grey.

Profiles of 30/26/3 mm, with a visible upper edge of 7 mm and fixings.

Profile height: 26 mm - Doormat recess height: 22 mm.

VER-BLACK - Black lacquered aluminum - Height 26 or 31 mm

Frames for entrance doormats in black lacquered aluminum.

Profiles of 31/26 or 26/31 mm, with a visible upper edge of 6 mm.

Profile height: 26 mm or 31 mm - Doormat recess height: 20 mm or 25 mm.

Please note, the frame thickness is 6 mm, you may need to use an underlay to compensate for the thickness.

PROMA-MS - Brass - Natural - Height 26 mm

Natural brass entrance mat frames.

Profiles of 30/26/3 mm, with a visible upper edge of 7 mm.

Profile height: 26 mm - Doormat recess height: 22 mm.

VER-LAI - Brass - Height 26 or 31 mm

Aluminum entry doormat frames in brass color.

Profiles of 31/26 or 26/31 mm, with a visible upper edge of 6 mm.

Profile height: 26 mm or 31 mm - Doormat recess height: 20 mm or 25 mm.

Please note, the frame thickness is 6 mm, you may need to use an underlay to compensate for the thickness.

Technical details:

Textiles:

• Textile height: 5 mm
• Textile width: 25 mm. Textile base width: 27 mm
• Drying insert material: 100% polyamide (nylon)
• Textile structure: velvet
• Density: 71,500 knots/m²
• Colors: gray, brown and blue (all heathered)

Aluminium profiles:

• Profiles: Height 15 mm (without scraper or brushes) or 19 mm. Width 30 mm. Aluminium (min. 78% recycled). Spaced at +- 4 mm.
• Connecting parts: Black rigid PVC - Crack resistant black GST66901 PE LD
• Accessories: DIN916A2 M4x8 stainless steel bolts. PVC (10 mm) or aluminum finishing plates. DIN7982 A2 C2 stainless steel screws, 9x13 H

The weight of the Economat Econodry Light is respectively 11, 14 or 15 kg/m2 for the three heights.

Tests:

In collaboration with Ghent University.

• Fire test: The doormat corresponds to category Bfl in the direction of travel, in accordance with EN ISO 11925-2 and EN ISO 9239-1.
• Smoke test: The doormat meets category S1.
• Lightfastness: Resistance to photodegradation. Produced according to ISO 105 B02(1994) with a result in category 6-7, where category 8 is the best result (2002).
• Wronz Test: Heavy wear test. The doormat achieves a value of 25,000, i.e., the equivalent of 500,000 to 1,200,000 uses. We can provide test reports 02-796C, 02-797C, and 02-798C.
• Static load test: There are no restrictions on the load caused by normal traffic, trolleys, and wheelchairs. For heavy traffic, rotating movements should be avoided; otherwise, the manufacturer always recommends using a protective panel.

Fire and smoke tests were carried out according to the EN 13501-1 (2007+A1:2009) classification. The products were not impregnated or treated with a coating; these are simply inherent characteristics of the materials used.

Ecological footprint:

The manufacturer is committed to reducing the environmental footprint of its product production.

For this reason, the products are manufactured using 100% renewable energy and locally sourced materials. Most of the materials used to produce this doormat are reusable and can be given a new life.

A little bit of chemistry... :-) Quality and Difference between Polypropylene and Polyamide:

Polypropylene offers excellent value for money and is hydrophobic! This material is ideal for applications that don't require excessive strength but still offer good abrasion resistance. Polypropylene is highly resistant to chemicals, making it suitable for a wide range of applications.

Polyamide , more commonly known as nylon, is a fairly dense fiber with a significant elongation at break (15 to 20%). Its high elongation allows it to protect fasteners under tension. An added benefit: Polyamide does not turn black when burned. Polyamide is also water-absorbent.

FAQ - Frequently Asked Questions

1. Is the doormat really custom-made?
   Yes, each EconoDry Heavy doormat is manufactured according to the exact dimensions provided when ordering.
2. Is it suitable for very frequent use?
   Absolutely, it is specifically designed for high-traffic areas, including commercial and professional entrances.
3. Can it be installed flush with the wall?
   Yes, it is perfectly compatible with recessed installation, which guarantees an aesthetic and secure result.
4. Is polyamide effective against moisture?
   Yes, polyamide is one of the best performing materials for absorbing water and retaining fine dirt, even in wet conditions.
5. Is it non-slip?
   Yes, its structure and weight ensure excellent stability, even under heavy traffic.
6. Is it suitable for outdoor use?
   It is ideal for covered or semi-covered areas. For fully exposed outdoor use, a complementary scraper model may be recommended.
7. How does the interview process work?
   A simple vacuum cleaner and occasional cleaning with water are all that's needed. The product is designed for easy maintenance.