Combibox soudafoam Click & fix - Sprayable PU foam - Soudal

Combibox soudafoam Click & fix - Sprayable PU foam - Soudal

The Combibox Soudafoam Click & Fix is a set of 10 Sprayable Soudafoam Click & Fix aerosols , 1 Click & Fix gun , 1 Click & Clean cleaner .

Features :

• High form stability (no shrinkage or post-expansion)
• High filling efficiency
• Excellent adhesion on all substrates, except PE/PP/PTFE
• Very good thermal and acoustic insulation
• Excellent characteristics for assembly
• Without freon (harmless for the ozone layer and the greenhouse effect)
• Not resistant to UV rays.

Applications:

• Filling of cavities
• Applying a Silent Layer
• Optimization of insulation in the field of refrigeration.
• All foam applications in static or non-static joints.

Manual :

1. Shake the aerosol well for 30 seconds.
   Thanks to the unique Click & Fix system (patented) of fixing, it is enough to turn the aerosol of a quarter turn on the gun.
2. Adjust the flow rate of the gun (with the screw at the back), then pull the trigger.
3. Fill voids only partially, as the foam will continue to expand.
4. Shake the aerosol regularly during use.
   In case of application of several coats, moisten the support between each coat.
5. Traces of foam that are not yet dry can be cleaned with Soudal Click & Clean.
6. Hardened foam can only be removed mechanically, with Soudal PU-remover.
7. The aerosol can be stored for later use; in this case, leave the gun on the aerosol.
8. At the end of the work, thoroughly clean the inside of the gun with Soudal Click & Clean.
   A good humidification of the support accelerates drying and improves the cellular structure of the foam.
9. Processing temperature: +5° C to +30° C.
10. Preferably store upright.

Content :

• 10 X Click & Fix Sprayable Soudafoam Aerosols
• 1 X Click & Fix Gun
• 1 X Click & clean cleaner.