Impregnation - High solids impregnating glaze - Linitop

Impregnation - High solids impregnating glaze - Linitop

Linitop Impregnation is a transparent microporous impregnation stain , high dry extract.
Undercoat and finish for exterior and interior wood of variable dimensions.

Very resistant and penetrating, anti-UV.
Great durability.

Properties :

• Impregnation primer to promote adhesion of the finish.
• Protective stain: application system in 2 layers only.
• Contains antifungal dry film protection agent.
• Very penetrating.
  Protects the support in depth.
  Adapts perfectly to dimensional variations in wood.

Destinations:

Exterior and interior vertical surfaces.
All wood, chalets, fences, balustrades, woodwork, frames, doors…

Features :

• Composition : Alkyd resins
• Finish : Satin/Matte
• Use : Interior/Exterior
• Yield : 16 m² per liter and per coat depending on the condition, porosity of the support and method of application
• Application equipment : Brush, roller, gun
• Drying :
  
  • Dust free: 5 to 7 hours
  • Recoverable: 24 hours
• Cleaning tools : White spirit
• Shelf life : 2 years minimum in original, unopened closed packaging

Manual :

In impregnation undercoat system (complete system):

1. Apply a layer of LINITOP IMPREGNATION.
2. Spalter application recommended.
   If applying by spray, smooth with a brush as you go.
   Apply in the natural direction of the support (direction of the wood fibers, etc.).
3. When applying, think carefully about the grooves and ends.
4. Always finish at the level of a blade or a natural break such as a door or window.
5. It is advisable to work from top to bottom.
6. After complete drying (24 to 48 hours), finish with 2 coats of tinted LINITOP CLASSIC or LINITOP SOLID type finish.

In a 2-layer protection system (undercoat and finish):

1. Apply 2 coats of LINITOP IMPREGNATION.
2. Spalter application recommended.
   If applying by spray, smooth with a brush as you go.
   Apply in the natural direction of the support (direction of the wood fibers, etc.).
3. When applying, think carefully about the grooves and ends.
4. Always finish at the level of a blade or a natural break such as a door or window.
   It is advisable to work from top to bottom.

Conditioning :

0.5L and 2.5L.

Finishes: