VegaFloor - Colourless PU sealer - Owatrol Pro

(5/5) out of 5 total ratings

A single-component, high-performance, water-based satin sealant that is easy to apply and has optimum mechanical and chemical resistance, including to ammonia products.

Packaging:
Finish:
6 Items
€35.73Tax Included
€36.84- 3%

Volume discounts

QuantityYou SaveUnit price
35 %€35.00
1010 %€33.16
OWA 113
3297974401132

VegaFloor - Colourless PU sealer - Owatrol Pro

Vegafloor , the single-component , high-performance water -based satin sealer , easy to apply and which has optimal mechanical and chemical resistance , including to ammonia products .

Properties :

  • Acrylic polyurethane.
  • Easy application.
  • Optimum mechanical and chemical resistance, including to ammonia products.
  • Colorless - odorless.
  • Does not yellow over time and does not fear light. Not slippery.
  • Available in matte, satin or gloss.
  • Beautifies and protects stairs, parquet floors and interior floors, new or old. Gives them warmth and radiance.
  • Ideal for :
    • normal traffic: bedrooms, living rooms...
    • heavy traffic: corridors, stairs, dining rooms...
  • Yield: Approximately 10 to 12 m² per coat per litre.
    Performance may vary depending on the condition of the support, its impregnation and the application equipment.

Substrate preparation:

  1. In order to avoid too deep scratches due to sanding, carry out a sanding test with a parquet sander equipped with a grit n° 40 or 50.
  2. Depending on the visual result obtained, gradually continue with a finer grit up to n° 80 or 100 or start with a coarser grit (grit < 40) for soil that is clogged and not flattened.
  3. Use a flanging machine for the edges, a scraper or a wood chisel for the angles.
  4. If necessary, fill cracks < 2 mm with Lianfloor and resume sanding with grit n° 80 or 100 depending on the last grit used.
  5. Finish with finishing sanding up to grit numbers 120 to 150 depending on the species and the thickness of the wear layer.

Professional advice:

  • Respect the particle size scale above. It is recommended to skip only one grain at a time.
  • Adapt the sanding pressure and speed according to the grain used, the nature of the more or less soft wood and the thickness of the wear layer. Good preparation is essential for the final appearance of the finish.
  • Always dust thoroughly with a vacuum cleaner between each sanding without forgetting the dust traps (baseboards, radiators, pipes, edges of bay windows, etc.).
  • Formerly oiled or waxed floors: prefer, first, dry stripping with DSP 800 followed by degreasing before sanding (contact us).
  • In all cases, comply with the standards/DTU in force.

Application :

  1. Shake the product well with a spatula.
    Use a helical mixer if necessary.
    Leave for a few minutes before applying.
  2. Apply an even, trimmed first coat of VegaFloor.
    Make 3 cross passes in one application by facing the light and starting from the part opposite the door in order to progress towards it.
  3. Start with the edges then work the entire surface, working in areas of 2m by 2m.
  4. Do not open windows during application to avoid too rapid drying.
  5. Let dry 3 to 4 hours depending on ambient conditions.
  6. Proceed with ginning (grains n° 150 to 180) then dust thoroughly.
  7. Apply the 2nd layer of VegaFloor.
    Do not exceed more than 12 hours between the application of the 2 coats.
  8. Wait at least 48 hours before replacing the furniture, protecting the feet with pads.
  9. Do not cover the vitrified support with mats or protective tarpaulins for at least 14 days after applying the vitrifier.

Destination :

Applies to all species usually used in this type of work.

Conditioning :

1L, 5L, 10L and 20L.

Owatrol
OWA 113
6 Items

Data sheet

Signal word
As of Q2 2023, no signal word is listed for this item when last checked. Please check the latest update of the technical data sheet issued by the manufacturer.
Hazard statements
H412 – Harmful to aquatic life with long lasting effects.
Hazard pictogram

Specific References

EAN13
3297974401132
Parfait

J'utilise ce produit comme "vernis" sur mes toiles (artistique) en finition . Cela rend la couleur de mes tableaux éclatant et brillant et leur donne vie. J'adore

By Natacha L. the 01/09/2023
Brillance et Transparence Assurées

J'ai détourné l'utilisation du produit et je m'en sers comme vernis sur des tableaux réalisés à l'acrylique. L'application que ce soit au spalter ou au rouleau est vraiment facile, aucune trace une fois sec. Un point essentiel : le produit est vraiment transparent et les blancs restent bien blancs. Le produit sèche rapidement ce qui permet quelques heures après de mettre une seconde couche si on le souhaite. Cette dernière étant aussi facile à appliquer et toujours sans laisser la moindre trace. J'utilise déjà un vitrificateur pour mes toiles, mais en version satinée. Pour certaines réalisations, je souhaite encore plus de brillance et ce vitrificateur m'apporte cette dernière. Deux couches, voire trois et on pourrait penser en voyant les toiles que de la résine a été appliquée. En conclusion : Je vais adopter ce produit lorsque je souhaiterai une brillance importante sur mes toiles. Je ne doute pas de l'efficacité de ce vitrificateur sur les sols mais n'ayant pour l'instant pas de parquets à vitrifier, je ne peux vous dire ce qu'il donne lorsque son utilisation n'est pas détournée ! Owatrol est une marque réputée sérieuse et de qualité, et c'est les yeux fermés que j'achète ses produits

By Sylvie M. the 03/07/2022
Mise en œuvre

Parfait

By Dominique B. the 07/11/2020
Vernis

Facile à appliquer Très satisfait.

By Myriam k. the 04/09/2020
Vegafloor vitrificateur

Très facile d'emploi et très bon rendu, maintenant a voir dans le temps, pas encore assez de recul..

By Michel M. the 10/09/2019

You might also like

Customers who bought this product also bought: