Yacht Vernis - Colourless soft varnish - Marine technology - Linitop

Yacht Vernis - Colourless soft varnish - Marine technology - Linitop

Colorless protective and decorative varnish for all wood from marine technology.

Combines performance and ease of application.
Special to harsh and humid climates.

Properties :

• Decorates and waterproofs wood over time.
• Particularly resistant to various bad weather: fog, snow, rain, salt water, etc.
• Ideal for rooms subject to high humidity (bathrooms) or for boats. (Above the waterline).
• Enriched with flexible alkyd resins to resist dimensional variations in wood.
• Does not blister or peel. Washable.
• Protects RUSTOL-OWATROL to give a decorative rust appearance to metal supports.

Destinations:

Interior and exterior wood.
Protects and decorates doors, frames, windows, furniture, boats (above the waterline)...
New or previously varnished wood except species containing an anti-oxidant (e.g. Iroko, etc.).

Features :

• Composition : Polyurethane-modified alkyd resins
• Finish : Satin/Glossy
• Use : Interior/Exterior
• Yield : 18 m² per liter per coat depending on condition and porosity of the support and method of application
• Application equipment : Brush, lacquer roller (low-hair wool type), spray gun
• Drying :
  
  • Dust free: 5 hours
  • Recoverable: 24 hours
• Cleaning tools : White spirit
• Shelf life : 2 years minimum in original, unopened closed packaging

Manual :

1. Apply 2 coats of YACHT VARNISH in the direction of the wood grain, cross the passes, leveling them.
   Respect as much as possible the topography of the support for the application.
   Be careful not to stop the application in the middle of the surface to avoid repeats as much as possible.
2. Start at the edges then cover the entire surface, working with areas no larger than 2 m by 2 m.
3. Allow 24 hours to dry between coats.
4. On particularly absorbent wood, apply 3 coats.
5. If applied by spray gun, it is possible to dilute YACHT VERNIS with White Spirit at a rate of 5 to 10%.
   If necessary, provide smoothing to avoid possible dripping.

Conditioning :

250 ml and 0.75 L.