Acryl Vernis - Interior acrylic varnish - Linitop

Linitop Acryl Varnish is a colorless protective and decorative varnish for interior wood enriched with PU resins for longer resistance to abrasion and water.
Great ease of application.

Very nice rounded (tight) and beautiful finish because it is very filling.
Does not blister or peel.

Packaging:
Finish:
1 Items
€15.36Tax Included
LIN AV.B-0.25
3297971102940

Acryl Vernis - Interior acrylic varnish - Linitop

Linitop Acryl Varnish is a colorless protective and decorative varnish for interior wood enriched with PU resins for longer resistance to abrasion and water.
Great ease of application.

Very nice rounded (tight) and beautiful finish because it is very filling.
Does not blister or peel.

Properties :

  • Decorates, waterproofs wood and highlights it.
  • Reinforced resistance to abrasion, scratches and water splashes.
  • Ideal for damp rooms such as bathrooms or kitchens.
  • Great ease of application
    Does not blister or peel. Washable
  • Apply to old, clean, adherent and frosted varnishes.
  • Scentless.
    Dries quickly.

Destinations:

Interior woods exclusively:

Protects and decorates frames, interior paneling, furniture, banisters, kitchens, doors, etc.
New or previously varnished wood except on gasoline containing an anti-oxidant (e.g. Iroko, etc.).

Features :

  • Composition : Hybrid acrylic polyurethane resins
  • Finish : Matte/Satin/Glossy
  • Use : Interior
  • Yield : 12 m² per liter and per coat depending on condition and porosity of the support and method of application
  • Application equipment : Brush, roller, gun
  • Drying :
    • Excluding dust: 1 hour - 2 hours for the spray
    • Recoverable: 6 hours
    • Complete drying: 36 to 48 hours
    • Hardening: 5 days.
  • Cleaning tools : Immediately with soapy water
  • Shelf life : 1 year minimum in original, unopened closed packaging

Manual :

  1. Apply 2 coats of ACRYL VARNISH in the direction of the wood grain, cross the passes, leveling them.
    Respect as much as possible the topography of the support for the application.
    Be careful not to stop the application in the middle of the surface to avoid repeats as much as possible.
  2. Start at the edges then cover the entire surface, working with areas no larger than 2 m by 2 m.
  3. Allow 6 hours to dry between coats.
  4. On bare wood, as a first coat, dilute with water to 10%, the same for spray application.
  5. On particularly absorbent wood, apply 3 coats.
  6. For an optimal finish, it is recommended to carry out fine sanding (280 grit) between each coat.
  7. In an aerosol, shake well before use until the mixing ball comes off.
    Apply between 15 and 20 cm from the support.
    Application must be done while moving to avoid overdoses and dripping.
  8. An aerosol application does not exempt from rigorous preparation of the support as described above.
  9. A spray application as a touch-up may show differences in shine; wherever possible, make a regular pass over the entire surface to be treated.

Conditioning :

250 ml and 0.75 L.

Linitop
LIN AV.B-0.25
1 Items

Data sheet

Signal word
As of Q4 2023, no signal word is listed for this item when last checked. Please check the latest update of the technical data sheet issued by the manufacturer.
Hazard statements
As of Q4 2023, no hazard statements are listed for this item when last checked. Please check the latest update of the technical data sheet issued by the manufacturer.
Hazard pictogram

Specific References

EAN13
3297971102940
There are no reviews for this product yet.