LITHOFIN CLASSIC WAX COTTO

A special product from the LITHOFIN range for terracotta and porous bricks. It is a colourless product, ready to use in the form of wax (a mixture of natural and synthetic waxes).

Currently out of catalog
Packaging:
€20.00Tax Included
€20.41- 2%

Volume discounts

QuantityYou SaveUnit price
35 %€19.39
108 %€18.78
COTCW1
9145342706645

Description:
A special product of LITHOFIN range for terracotta and porous bricks. It is a colourless, ready to use in the form of wax (a mixture of natural and synthetic waxes).

Properties:
It is a particularly easy to apply and extend product, leaving after applying a wax film resistant to abrasion, easy to Polish, giving ground cooked its traditional appearance.

Technical specifications:

  • Density: 0.80 g/cm³
  • Flash point: approximately 35 ° c.
  • Appearance: Yellow-white, compact
  • Odour: aromatic

Scope of application:
For the final treatment of the new soils that were pretreated with Lithofin Cotto classic shade (or) Lithofin Stop task: in this case, refer to Backgrounder No. 4 concerning the Lithofin Cotto CLASSIC PRIMER product.
Waxing with Lithofin Cotto classic wax is the 2nd stage of the classical treatment that provides terracotta colour intense and hot.
This product can also be used for the treatment and renovation of already polished and worn surfaces. It is not polished, very porous surfaces and for external uses.

Instructions for use:
After a long storage period, stir well before use. The wax may be previously liquefied (in a water bath), allowing an easier application and offering a larger coverage area.
After a period of non-use, again heat the product in a "bain-marie" before use and stir.
Applied Lithofin classic wax Cotto on a dry surface treated with Lithofin Cotto CLASSIC PRIMER.
Apply a thin layer with a lint-free cotton cloth, a polisher can be used for processing large surfaces using a soft brush. The drying time is about 30 min. Depending on the ambient temperature of the room. 1 to 3 layers of product can be applied on the basis of the volume of traffic on the ground. For each new layer, apply the thin wax and polishing after 10 min. approximately. After each treatment, do not walk on the floor for at least 6 hours (preferably 10 hours).
Performance: About 20 m²/litre on the basis of the surface.
New applications: 50 m²/litre

Storage:
In a cool and dry room, properly closed container can be stored for about 2 years.

Complementary treatment:
It is recommended to use Lithofin CottoEASY CLEAN for daily maintenance, mixed with the wash water.

Security:
Keep out of reach of children, ventilate the room during and after the application. Classification according to the regulations on hazardous materials or directive 88/379 CE: flammable

Protection of the environment:
The tank is made of polyethylene (PE) non-polluting and recyclable. After rinsing and drying, cans can be integrated into the system of recovery of materials. Residues of products should be treated as special waste.

Packaging:
Bottle with safety Cap.

Lithofin
COTCW1

Specific References

EAN13
9145342706645

Download

LITHOFIN CLASSIC WAX COTTO

Specifications of LITHOFIN CLASSIC WAX COTTO

Download (6.6KB)
There are no reviews for this product yet.

Customers who bought this product also bought: